$2,731.00

1 in stock

Daniel Defense DD5 V4 7.62 X 51 308

SHARE THIS

Product Description

Daniel Defense DD5 V4 7.62 X 51 308

The DD5 V4, chambered in either 6.5 Creedmoor or 7.62 x 51 NATO, provides users of the Daniel Defense semi-automatic platform even greater long-range precision shooting capability. The highly popular 6.5 Creedmoor takes advantage of superior ballistic coefficients to offer both flatter trajectories and reduced wind drift at levels normally reserved for much heavier recoiling long action calibers. These gains in ballistic efficiency help the modern shooter stretch the effective range out to 1,000 meters or more. This highly accurate and durable rifle includes an adjustable gas block that allows for a consistent feel whether shooting suppressed or unsuppressed. The perfected bolt carrier group reduces overall recoil impulse and is easy to maintain and operate in all conditions.

  • User-adjustable gas block for reliable suppressed shooting
  • Superfinished and DLC-coated bolt carrier group makes it easy to clean and operate in all conditions
  • Bolt carrier is equipped with a buffer for optimized cycling and improved recoil impulse
  • Bolt is designed with enhanced extractor geometry and dual ejectors for reliable cycling
  • 18″ Cold Hammer Forged proprietary steel chrome-lined barrel for a lifetime of accuracy and durability
  • Innovative 4-Bolt Connection System to ensure greater accuracy
  • GRIP-N-RIP independently ambi charging handle with anti-gas features for a better shooting experience

Daniel Defense DD5 V4 7.62 cradled in his arms

The wind whipped across the rocky ridgeline as Jake settled into his overwatch position, the Daniel Defense DD5 V4 7.62 cradled in his arms. He exhaled slowly, lasering his focus down the crisp LPVO optic as he scanned the valley below for any sign of movement.

His squad was counting on him to provide overwatch security as they cleared through the village searching for the high-value target. Jake’s mind raced back to the mission brief – this was the man responsible for unspeakable atrocities against innocent civilians. He had to be stopped at all costs.

A flicker of movement caught Jake’s eye through the scope about 800 meters out. He tracked it carefully as two armed militants appeared, seemingly unaware of the looming threat high above them. Jake’s indexfinger tightened on the DDM4 trigger as he took up the slack.

In a split second, Jake’s training took over. He exhaled fully and held it as he found his final firing solution. The first round cracked from the 7.62x51mm DD5, the recoil driving solidly into Jake’s shoulder. Before the first target could react, a second precise shot found its mark.

The Daniel Defense DD5 V4 7.62 had spoken

Jake scanned for additional threats but all was clear. He keyed his radio mic, “Overwatch clear. Targets neutralized.” The Daniel Defense DD5 V4 7.62 had spoken with its surgical precision and authority. Jake smiled grimly. This weapon was born for the fight.

With its 18″ cold hammer-forged barrel, ultra-reliable short-stroke piston operation, and rock-solid accuracy, the DD5 had delivered yet again when it mattered most. Jake racked the bolt and chambered another round as he maintained overwatch. Whatever the operation threw at him next, he and his Daniel Defense rifle were ready.

  • LOWER RECEIVER: Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: DD Proprietary Steel, Cold Hammer Forged, 1:8″ (6.5 Creedmoor), 1:11″ (7.62), 18″ S2W Profile, Rifle Length, Chrome Lined, Mil-Spec Heavy Phosphate Coated
  • GAS SYSTEM: User-Adjustable Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Superior Suppression Device, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • TRIGGER: Daniel Defense Mil-Spec
  • HANDGUARD: Daniel Defense DD5 Rail 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • MAGAZINES: Accepts All SR-25 Magazines
  • Made in the USA!
More Information
Mounting System M-LOK
Caliber 7.62 x 51mm / .308 Winchester
Muzzle Thread 5⁄8×24 TPI (Threads Per Inch)
Gas System Intermediate
Barrel Length 18″
Barrel Profile S2W® [Strength-to-Weight]
Product Weight 8.3 LBS
Length 33 3/8″ – 37″
Magazine Magpul PMAG 20-Round
Case Daniel Defense Full-Latch Impact Plastic Case
Manufacturer Daniel Defense

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.