5.00 out of 5 based on 1 customer rating
(1 customer review)

$2,338.00

2 in stock

Product Code: DD-02-088-22038 Categories: , , , , , ,

DANIEL DEFENSE MK18 PISTOL (LAW TACTICAL)

SHARE THIS

Product Description

Daniel Defense MK18 Pistol (Law Tactical)

The Daniel Defense MK18 Pistol, equipped with the SB-Tactical SOB Pistol Stabilizing Brace and LAW Tactical GEN3M folding stock adapter, is a variation of the MK18 SBR, which has been extremely popular within the Law Enforcement and Special Operations communities.  This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp).  The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel, the same length commonly used for CQB operations.  The MK18 RISII features the Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM.  This pistol comes equipped with the rugged and comfortable Daniel Defense Pistol Grip with an integral trigger guard and soft touch overmolding.  The MK18 Pistol is unmatched in size, weight, and performance.  There are many reasons to own a MK18 Pistol.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 10.3″ Govt Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • HANDGUARD: Daniel Defense MK18 RIS II, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized, FDE
  • RECEIVER EXTENSION: AR Pistol Receiver Extension, Law Tactical GEN3M Folding Adapter
  • BRACE: SB-Tactical SOB Pistol Stabilizing Brace
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
  • Made in the USA!

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible.  Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products.  Be sure to retain your sales slip as proof of purchase date when making a claim.

 


Additional Information

Manufacturing # / SKU 02-088-22038
Restricted Shipping Yes
Caliber 5.56mm NATO
Muzzle Thread 1⁄2×28 TPI (Threads Per Inch)
Gas System Carbine
Barrel Length 10.3″
Profile Government
Product Weight 6.08 lbs
Length 30 1/4
Magazine DD Magazine (32 Round)
Case Daniel Defense Full-Latch Impact Plastic Case
Manufacturer Daniel Defense

1 review for DANIEL DEFENSE MK18 PISTOL (LAW TACTICAL)

  1. 5 out of 5

    (verified owner):

    I think this is one of the best 10.3 ARs out there , ordered mine week ago already put maybe 200 rounds threw it , not one issue . Only complaint I have is the picture shows brown pistol grip mone was black so pictures may be a little off on what colors you actually get . Shipping was fast maybe 3 days . I would definitely order here again , I’d just double check the colors first .
    Salisbury NC

Add a review

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.