$2,099.99

BACKORDER AS OF 11/16 YOU HAVE A GUARENTEED DELIVERY DATE OF JUNE ANY TIME AFTER 11/16 IS NOT GUARENTEED AND COULD BE A LATER DELIVERY DATE

If this item is on backorder,  we are a Master Dealer with Daniel Defense and will special order and have one made for you when you place your order with us.  Keep in mind that it is extremely busy right now and these special orders will take time to get delivered.  If you place a special order by ordering this item on backorder, there are no cancellations allowed, so be sure you are ok with waiting to get your firearm.  By doing this special order it is a way to ensure that you are able to get one of these Daniel Defense firearms. 

Daniel Defense MK18 Pistol

SHARE THIS

Product Description

The Daniel Defense MK18 Pistol is a variation of the MK18 SBR.  It has been extremely popular within the Law Enforcement and Special Operations communities. This firearm is classified as a Pistol and not a Short Barreled Rifle (NFA regulated items require ATF approval and a tax stamp). The Daniel Defense MK18 Pistol features the railed forend Daniel Defense currently provides to USSOCOM and a 10.3” Cold Hammer Forged Barrel, the same length commonly used for CQB operations. The MK18 RISII features the patented 6-bolt Bolt-Up System and has been rigorously tested prior to fielding by USSOCOM. This pistol comes equipped with the SB Tactical SBA3 Pistol Stabilizing Brace with 5 positions of adjustability and integral, ambidextrous QD swivel attachment point.  The new independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters and is engineered for suppressed fire, with anti-gas features that redirect gas flow upward and away from the face and operator.  There are several different versions of the MK18 on our site.  The MK18 is one of the most used firearms for military and police all over the world.  There are many reasons to own a MK18 Pistol.

 

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: AR Pistol Receiver Extension
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 10.3″ Govt Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized, Black
  • BRACE: SB-Tactical SOB Pistol Stabilizing Brace
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, heat resistant to 300° F.
  • Made in the USA!

All Daniel Defense products carry a 100% satisfaction guarantee against defects in original materials and workmanship. If your Daniel Defense product shows evidence of such defects, Daniel Defense will make every accommodation to fix, repair, or replace your product in the most expeditious manner possible. Daniel Defense does not warranty products or damage caused to our products by the correct or incorrect installation of other manufacturer’s products. Be sure to retain your sales slip as proof of purchase date when making a claim.

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense MK18 Pistol”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Additional information

Features

MATERIALS & CONSTRUCTION LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 10.3″ Govt Profile, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished BOLT CARRIER GROUP: M16 Profile, Mil-Spec HP and MP Tested, Chrome Lined, Properly Staked Gas Key BUFFER: H Buffer SIGHTS: Sold Separately HANDGUARD: Daniel Defense RIS II MK18, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized FDE RECEIVER EXTENSION: Daniel Defense 1.15” Diameter Pistol Receiver Extension PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding RAIL LADDERS: 3 low profile ladders made from Santoprene, heat resistant to 300° F. Made in the USA!

You may also like…