Bravo Company AR-15 Charging Handle – Mod 3 Large Latch

Product Description

The Bravo Company AR-15 Charging Handle – Mod 3 Large Latch is an ambidextrous charging handle designed for AR-15 and M16 pattern rifles. It features an enlarged latch surface on both sides of the handle.

The large latch design gives you more surface area to grab when you’re wearing gloves, using optics with low-profile mounts, or running drills that demand speed. It replaces the mil-spec charging handle that ships with most AR uppers.

This charging handle fits any standard AR-15 or M16 upper receiver. It’s a drop-in part that requires no modification to your rifle.

Key Facts

• Model: Bravo Company Mod 3 Large Latch
• SKU: BCM-MOD-3
• Firearm Type: AR-15/M16
• Category: Charging handle for AR-15 pattern rifles

How the Mod 3 Compares to Mil-Spec Charging Handles

Standard mil-spec charging handles have a small, one-sided latch that sits inside the channel of the upper receiver. You pull the latch away from the receiver, then pull the handle to the rear.

The Mod 3 extends the latch on both sides of the handle. This gives you a larger gripping surface and makes the handle ambidextrous. You can charge the rifle from either side with equal ease.

Shooters who run scopes or red dots with low mounts often find that the optic blocks access to a standard charging handle. The extended latches on the Mod 3 sit outside the receiver channel and clear most optics.

What to Know Before You Order

The Mod 3 is compatible with any AR-15 or M16 upper receiver that accepts a standard charging handle. It installs in seconds: pull the takedown pins, separate the upper from the lower, remove the bolt carrier group, and slide the old handle out. Slide the new handle in and reassemble.

If you’re building a rifle from parts or upgrading an existing upper, this handle pairs with any bolt carrier group and upper receiver combination. Send us a message if you have questions about fitment with a specific upper or optic setup.

Ordering from Western Sport

Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.

Frequently Asked Questions

Q: Does the BCM Mod 3 charging handle fit a standard AR-15 upper?

A: Yes, the BCM Mod 3 fits any AR-15 or M16 upper receiver that accepts a mil-spec charging handle. It is a direct replacement and requires no modifications to the upper receiver.

Q: Is the Mod 3 ambidextrous?

A: Yes, the Mod 3 has extended latches on both the left and right sides of the handle. You can operate it from either side of the rifle with equal ease.

Q: How does the Mod 3 compare to other Bravo Company charging handles?

A: Bravo Company makes several charging handle models with different latch sizes and configurations. The Mod 3 features a large latch on both sides. Send us a message if you need help choosing the right model for your rifle and shooting style.

Q: Will the BCM Mod 3 clear my optic mount?

A: The Mod 3’s extended latches sit outside the receiver channel and clear most optics and mounts. If you’re running a very low mount or an unusual setup, send us a message to confirm clearance before ordering.

Q: Can I install the Mod 3 myself?

A: Yes, installing a charging handle is straightforward. Separate the upper from the lower, remove the bolt carrier group, slide out the old handle, and slide in the new one. No special tools are required. If you prefer professional installation, our gunsmith can handle it.

Q: Do I need an FFL to buy a charging handle in Texas?

A: No, charging handles are parts and do not require an FFL transfer. They can ship directly to your address. Send us a message if you have questions about your order.

Additional information