The Vortex Crossfire II 4-12×44 riflescope is a variable-power optic with a 1-inch tube, V-Plex reticle, and MOA adjustments suited to centerfire rifles for hunting and target work. The 4-12x magnification range handles everything from close timber to mid-range precision.
A V-Plex reticle gives you a simple, open aiming point that does not obscure the target at distance. MOA turrets let you dial elevation and windage corrections in one-minute increments, a familiar standard for shooters who range in yards.
The 1-inch tube diameter fits most ring sets already on hand. The 44mm objective gathers enough light for dawn and dusk hunts without adding bulk.
Key Facts
Brand: Vortex
Model: Crossfire II CF2-31013
Magnification: 4-12x
Reticle: V-Plex MOA
Tube Diameter: 1 inch
Objective Diameter: 44mm
Why Choose a 4-12x Magnification Range
A 4-12x scope bridges the gap between close-range hunting and longer precision shooting. At 4x, you maintain a wide field of view for fast target acquisition inside 100 yards. Dial up to 12x and you gain the resolution needed for small targets or careful shot placement past 300 yards.
This range suits whitetail hunters who need flexibility in mixed terrain, varmint shooters who vary their engagement distances, and rifle shooters building general-purpose setups. It avoids the tunnel vision of a fixed high-power optic while giving you more reach than a red dot or low-power variable.
Understanding the V-Plex MOA Reticle
The V-Plex is a duplex-style reticle with thick outer posts that taper to fine crosshairs at the center. It draws your eye to the aiming point quickly and stays visible against dark backgrounds, while the fine center does not cover small targets at distance.
MOA turrets move the point of impact in one-minute-of-angle clicks. One MOA equals roughly one inch at 100 yards, two inches at 200 yards, and so on. If you range in yards and prefer inch-based corrections, MOA is the faster math. Shooters who think in meters or tenths often prefer mil-based riflescopes instead.
Mounting a 1-Inch Tube Riflescope
A 1-inch tube requires 1-inch diameter rings. Measure or confirm your ring size before ordering mounts; 30mm rings will not fit, and undersized rings will crush the tube. Most bolt-action hunting rifles use a two-piece ring set that attaches to a Weaver-style or Picatinny base, or directly to dovetail receiver cuts on rimfire rifles.
Proper eye relief and cheek weld depend on ring height. Low rings work when the objective bell clears the barrel, medium or high rings lift the scope when using larger objectives or AR-platform uppers. Send us a message if you need help selecting the correct ring height and base for your rifle.
Ordering from Western Sport
Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.
Frequently Asked Questions
Q: What rifles work with the Vortex Crossfire II 4-12×44?
A: The Crossfire II 4-12×44 fits any rifle that accepts a 1-inch tube scope, including bolt-action hunting rifles, ARs with flat-top uppers and appropriate mounts, and many lever guns with drilled-and-tapped receivers. Confirm that your rings and bases match the 1-inch tube diameter and that the objective bell clears your barrel at the desired ring height.
Q: How does MOA compare to MRAD for turret adjustments?
A: MOA adjustments move the point of impact approximately one inch per click at 100 yards, making mental math simple if you range in yards and measure groups in inches. MRAD (mil) adjustments move the impact roughly 3.6 inches per click at 100 yards, which suits metric ranging and angular measurement. Both systems work; choose the one that matches how you already think about distance and corrections.
Q: Can I use this scope for long-range shooting?
A: The 12x top-end magnification and MOA turrets support precision shooting to moderate distances, typically 400–600 yards depending on cartridge and target size. Beyond that range, many shooters prefer higher magnification and more elevation travel. For hunting inside 400 yards or recreational target work, the 4-12x range is well-suited.
Q: What is the difference between the Crossfire II and Vortex Diamondback scopes?
A: Both series offer reliable variable-power optics at accessible price points, but specific feature differences vary by model. The Crossfire II series generally uses a 1-inch tube, while some Diamondback models step up to 30mm tubes with additional internal adjustment range. Send us a message to discuss which model fits your rifle and intended use.
This item is out of stock. These are on the shelf today and ship or transfer the same way. Not sure which is the right swap? Call 817-393-4000 and we will tell you straight.
Reviews
There are no reviews yet.