Sale!

Original price was: $259.00.Current price is: $239.00.

Out of stock

🚚 Not on our shelf today — order now to reserve yours, or call (817) 393-4000 for a current lead time. Free local pickup in Roanoke, TX when it arrives.

The Law Tactical Folding Stock Adapter Gen 3-M FDE lets you fold your AR-15 stock to the left, reducing overall length for transport and storage.

SHARE THIS

Product Description

The Law Tactical Folding Stock Adapter Gen 3-M FDE is a hinge mechanism that mounts between your AR-15 lower receiver and buffer tube, allowing the stock to fold to the left side. This adapter reduces the rifle’s profile for transport, vehicle storage, and pack carry without removing components.

The Gen 3-M model uses a wider hinge pin and simplified latch design compared to earlier versions. The FDE finish matches many factory and aftermarket parts in Flat Dark Earth.

This adapter works with direct impingement and piston-driven AR-15 platforms. Installation requires removing your existing buffer tube, threading the adapter onto the lower receiver, then reattaching the tube to the adapter’s hinge section.

Key Facts

  • Model: Law Tactical Folding Stock Adapter Gen 3-M
  • Finish: FDE (Flat Dark Earth)
  • SKU: Law-Folder-3-M-FDE
  • Compatibility: AR-15 platform rifles with standard receiver extension threads

How the Law Folder Works on an AR-15

The Law Tactical folder installs between the receiver and your buffer tube. The hinge lets the entire stock assembly pivot to the left and lock in the folded position. When folded, the rifle cannot fire because the bolt carrier no longer has clearance to cycle fully.

You can charge the rifle and load a round with the stock folded, then unfold and fire immediately. The latch releases with thumb pressure. Most shooters find the length reduction helpful for range bags, truck storage, and backpack carry.

The adapter adds approximately 1.3 inches to overall length when unfolded. This shifts your length of pull unless you swap to a shorter buffer tube or adjust the stock position. If you’re building a new rifle, account for this during parts selection.

Law Tactical Gen 3-M vs Earlier Versions

The Gen 3-M uses a larger diameter hinge pin than the original Gen 3. The latch mechanism also changed to reduce parts count and simplify field maintenance. Both updates address wear points that appeared after extended use in the earlier design.

The Gen 3-M is not a drop-in replacement for older Law folders. The mounting footprint changed slightly, so you cannot swap just the hinge assembly between generations.

What to Confirm Before You Buy

The Law folder works with mil-spec and commercial buffer tubes, but some aftermarket stocks have wider cheek risers or storage compartments that contact the receiver when folded. Magpul CTR and MOE stocks clear without issue. Call 817-393-4000 if you’re unsure about your specific stock model.

Piston systems and adjustable gas blocks sometimes require tuning after install because the hinge adds reciprocating mass. Most direct impingement setups run without adjustment. Confirm what ships in the box and whether you need additional parts like a shorter buffer spring by calling before you order.

Western Sport stocks a range of buffers and buffer tube kits and stocks and grip components that pair with the Law adapter.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL/SOT dealer and gunsmith shop serving North Texas and the DFW area since 2007. Owner and gunsmith Lance Rankin and his team handle transfers, custom builds, and parts orders. Call 817-393-4000 to confirm lead time, verify compatibility with your build, or place an order.

Frequently Asked Questions

Q: What is included with the Law Tactical Gen 3-M FDE folder?

A: Call 817-393-4000 to confirm what ships in the box, including any installation hardware or tools.

Q: Does the Law Tactical folding stock adapter work with any AR-15?

A: The Law folder fits AR-15 lowers with standard receiver extension threads, both mil-spec and commercial. It works with direct impingement and piston systems, though piston rifles sometimes need gas system tuning. Some oversized stocks may not clear the receiver when folded, so confirm fitment if you run aftermarket furniture.

Q: Can you fire an AR-15 with the Law folder in the folded position?

A: No, you cannot fire with the stock folded. The bolt carrier cannot cycle fully when the hinge is closed. You can chamber a round while folded, then unfold the stock and fire immediately once the latch locks.

Q: What is the difference between the Law Tactical Gen 3 and Gen 3-M?

A: The Gen 3-M uses a wider hinge pin and a simplified latch design compared to the original Gen 3. These changes improve durability under repeated folding cycles. The Gen 3-M has a different mounting footprint and is not backward-compatible with earlier models.

Q: How much does the Law folder add to the length of pull on an AR-15?

A: The adapter adds length between the receiver and buffer tube, which increases your length of pull unless you adjust the stock position or switch to a shorter tube. Call 817-393-4000 for guidance on pairing the folder with your specific stock and buffer setup.

Q: How do I buy the Law Tactical folder from Western Sport in Texas?

A: Call Western Sport at 817-393-4000 to place an order or ask about lead time. Western Sport is located in Roanoke, Texas, and serves the DFW area. If you’re ordering a complete lower or need gunsmithing to install the adapter, the shop can handle both the transfer and the build work on site.

SPECIFICATIONS

Housing Weight: 8.5 oz
Bolt Carrier Extension: 2 oz
Adds 1.3 inches to length of pull

CNC Machined 4140 Steel

Low hinge reduces interference when charging weapon
Retaining Pin u ses standard, mil-spec buffer retaining pin
DLC finish

ADJUSTABLE hinge tension

4140 HARDENED Steel
Low-profile housing, locking lug and latch
SET SCREW Prevents adapter loosening from receiver
QUICK DETACH Sling attachment point
TOOLESS BOLT CARRIER EXTENSION
Install and remove without tools for easy maintenance
REPLACEABLE O-RINGS
Prevent additional damage to the adapter in the folded position
SYMMETRICAL DESIGN
Eliminates interference with buffer retaining pin
*Installation Tool, Bolt Carrier Extension and Flange included

Additional information

Weight 0.5 lbs
Dimensions 6 × 4 × 2 in
Finish

Reviews

There are no reviews yet.

Be the first to review “Law Tactical Folding Stock Adapter Gen 3-M FDE”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

In Stock Now — Comparable Options

This item is out of stock. These are on the shelf today and ship or transfer the same way. Not sure which is the right swap? Call 817-393-4000 and we will tell you straight.