Warne Mountain Tech for Winchester 70 is a one-piece, 0 MOA long action scope mount made from 7075/T6 billet aluminum. It is for Winchester 70 owners who want a matte black base to mount a scope on a long action rifle.
Fits the Winchester 70 long action
0 MOA one-piece base
7075/T6 billet aluminum construction
Matte black finish
Uses 6-48 screws
Mfr part number 7676M
SKU: DAV-7676M · Mfr part #: 7676M · UPC: 656813105601
Warne Mountain Tech for Winchester 70 is a long action scope mount with a 0 MOA, one-piece base. It is made for the Winchester 70 and comes in a matte black finish.
The base is made from 7075/T6 billet aluminum. That is a common choice for scope bases because it is a strong alloy that holds up to recoil and field use. A one-piece base also means you are working with a single part on the receiver instead of two separate bases. The base uses 6-48 screws.
What the 0 MOA rating means
A 0 MOA base has no built-in forward tilt. The scope sits level with the bore line of the mount, and any elevation adjustment comes from the scope itself. If you plan long-range shots and want extra elevation travel, that is something to think through before you order.
This mount suits Winchester 70 owners with a long action rifle who want to put a scope on a hunting or range rifle. Confirm your action length before you buy. It pairs with a scope and a set of rings sized to your scope tube. Pick rings that match the tube diameter of your optic, and choose a height that clears your objective bell and barrel. The matte black finish gives a flat, low-glare look that matches most factory rifle hardware.
Warne Mountain Tech for Winchester 70, Black Specifications
Type
Mountain Tech
Tube Diameter
Long Action
Fits
Winchester 70
Material
7075/T6 Billet Aluminum
Finish / Color
Matte, Black
UPC
656813105601
Mfr Part #
7676M
Shipping Weight
3.2 oz (boxed)
Ordering from Western Sport
Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.
Frequently Asked Questions
Q: Which Winchester 70 action does this Warne Mountain Tech base fit?
A: The Winchester 70 long action. Check your rifle's action length before ordering.
Q: What is this scope base made of?
A: 7075/T6 billet aluminum. It has a matte black finish.
Q: Does this base have a built-in MOA slope?
A: No. It is a 0 MOA base, so it has no built-in elevation tilt.
Q: What screw size does this base use?
A: 6-48. It is a one-piece base for the Winchester 70 long action.
Q: What is the Warne part number for this mount?
A: 7676M. The UPC is 656813105601.
Warranty and Manufacturer
Covered by the Warne factory warranty; warranty terms come from Warne.
Reviews
There are no reviews yet.