The Daniel Defense Buttstock, Pistol Grip, and Vertical Foregrip Combo – Mil Spec gives you three complete furniture pieces for an AR-pattern rifle in one package. This is a mil-spec configuration designed to drop onto a standard carbine buffer tube and lower receiver without modification.
The combo simplifies parts sourcing when you’re building or refreshing a rifle. Instead of ordering grips, stocks, and foregrips separately, you get matching Daniel Defense components ready to install.
Key Facts
Brand: Daniel Defense
SKU: DD-28-102-06145-011
Product Type: Lower Parts
Compatibility: Mil-Spec
What Mil-Spec Compatibility Means for This Daniel Defense Stock and Grip
Mil-spec refers to the buffer tube diameter and lower receiver dimensions. A mil-spec buttstock fits a carbine buffer tube with a 1.14-inch outer diameter, which is the standard on most AR-15 and AR-10 platform rifles. The pistol grip installs on any standard lower receiver grip mount using a single through-bolt and lock washer.
The vertical foregrip typically mounts to Picatinny rail sections, though confirm rail type and attachment method before ordering if your handguard uses a different system. For specific fit questions on your build, send us a message and we’ll walk through compatibility.
Why Builders Choose a Daniel Defense Grip and Stock Set
Matching furniture keeps your rifle visually consistent and ensures geometry remains predictable. When the buttstock, pistol grip, and foregrip come from the same manufacturer, the texture patterns and angles tend to complement each other rather than creating mixed contact points.
Daniel Defense designs all three pieces to work together on duty and recreational rifles. The vertical foregrip adds a forward hand position for recoil management and transitions, while the pistol grip angle and buttstock length of pull affect your sight picture and trigger control.
Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.
Frequently Asked Questions
Q: Does the Daniel Defense stock and grip combo fit commercial buffer tubes?
A: This combo is mil-spec, which means the buttstock is sized for a 1.14-inch diameter carbine buffer tube. Commercial buffer tubes are slightly larger at 1.17 inches and are not compatible with mil-spec stocks. Measure your buffer tube diameter or send us a message to confirm which type you have.
Q: Can I use this Daniel Defense grip and stock on an AR-10 or 308 rifle?
A: Yes, the pistol grip and buttstock will fit any AR-pattern lower receiver and mil-spec buffer tube regardless of caliber. The foregrip mounts to rail sections, so verify your handguard accepts the attachment type before ordering. Most large-frame ARs use the same grip and stock interface as AR-15 rifles.
Q: Is this Daniel Defense furniture set available in FDE or other colors?
A: The product name for this SKU does not specify a color.
Q: Will this vertical foregrip fit M-LOK or KeyMod handguards?
A: The attachment method for the vertical foregrip is not specified in the product details. Most vertical foregrips attach to Picatinny rail, though some use direct M-LOK or KeyMod interfaces. Send us a message to confirm compatibility with your specific handguard system before ordering.
Q: How do I install a pistol grip and buttstock on a mil-spec lower?
A: The pistol grip secures with a single bolt through the bottom of the lower receiver, captured by a lock washer and grip screw. The buttstock slides onto the buffer tube after removing the buffer and spring, then locks in place with a friction lever or latch.
1 review for Daniel Defense Buttstock, Pistol Grip, and Vertical Foregrip Combo – Mil Spec
5 out of 5
Shannon Andrews – :
I installed this kit on my RRA pistol lower receiver because I didn’t want my AR to look exactly like all the others that I see. I was originally going to do magpul fde furniture , which I really do like but I am glad I went with the Daniel Defense. I also purchased the WS-8 custom upper by Daniel Defense from Western Sport and would not hesitate to do it again, made from the same quality parts as any other Daniel Defense upper. So if your on the fence with either one, get off and buy it…..you won’t regret it.
Shannon Andrews – :
I installed this kit on my RRA pistol lower receiver because I didn’t want my AR to look exactly like all the others that I see. I was originally going to do magpul fde furniture , which I really do like but I am glad I went with the Daniel Defense. I also purchased the WS-8 custom upper by Daniel Defense from Western Sport and would not hesitate to do it again, made from the same quality parts as any other Daniel Defense upper. So if your on the fence with either one, get off and buy it…..you won’t regret it.