Original price was: $49.95.$39.95Current price is: $39.95.
14 in stock
4.9278 Google reviews- Shipping: $9.99. Most in-stock orders ship the same or next business day.
- Returns: 30 days on unopened items, minus shipping both ways. Opened items also have a 15% restocking fee.
- Damaged or wrong item: Tell us within 3 days and we’ll email you a free return label.
Impact-resistant polymer flip-up front sight that clamps to Picatinny rails and provides standard A2 height-over-bore in a compact, optics-compatible footprint.
SHARE THIS
Product Description
The Magpul MBUS Gen 2 Front Sight in Flat Dark Earth is a spring-loaded polymer flip-up sight designed for MIL-STD-1913 Picatinny and STANAG 4694 railed handguards. It provides the same height-over-bore as standard A2 iron sights while offering a reduced footprint that improves compatibility with magnified and reflex optics.
This front sight deploys quickly from either side or by pressing the top. Protective wings shield the spring-locking A2-style front sight post, which holds consistent elevation once zeroed. The sight stows flat under impact thanks to detent and spring pressure that keeps it erect during use but allows unobstructed folding when bumped.
Backup iron sights remain the most reliable aiming solution when your primary optic fails, loses power, or takes a hard hit. The MBUS Gen 2 offers that reliability without adding bulk or snagging on gear.
Key Facts
- Finish: Flat Dark Earth (FDE)
- Construction: Impact-resistant polymer
- Rail Compatibility: MIL-STD-1913 Picatinny / STANAG 4694
- Weight with hardware: 1.2 oz
- Stowed length: 2.6 in
- Height above rail when stowed: approximately 0.51 in
Why the Gen 2 Profile Matters for Optics
The MBUS Gen 2 reduces its deployed length to 1.5 inches, which is shorter than many first-generation polymer flip-ups. That compact profile clears the objective bell and eyepiece of most variable-power optics mounted forward on the rail. If you run a low-power variable or a red dot with a magnifier, the reduced height when stowed and the shorter deployed length prevent interference.
The sight posts sits at standard A2 height-over-bore, so your zero and holdovers remain consistent if you have trained with military-pattern irons. You can co-witness with most lower-third red dot mounts or use the MBUS as a standalone backup system.
Spring-Loaded Deployment and Locking Front Post
You can activate the sight from either side or by pressing down on the top edge. Spring pressure snaps it into the upright position, and a detent holds it there until you manually fold it or until hard impact forces it down. That impact-folding feature prevents the sight base from cracking when you drop the rifle or bump the muzzle against a barricade.
The front sight post uses a spring-locking mechanism that resists vibration and holds elevation between range sessions. Protective wings on each side of the post shield it from side impacts and prevent the post from bending during rough handling.
Polymer Construction and Operational Abuse
Impact-resistant polymer sheds weight compared to aluminum or steel flip-ups. At 1.2 ounces with mounting hardware, the MBUS Gen 2 front sight adds minimal mass to the end of your handguard, which helps keep the rifle balanced for offhand shooting.
Polymer also resists corrosion without added coatings. Salt spray, sweat, and cleaning solvents will not pit or oxidize the sight body. The clamp mechanism secures to any MIL-STD-1913 Picatinny or STANAG 4694 rail without tools beyond the included hex key, though Send us a message to confirm what hardware ships with this sight.
Ordering from Western Sport
Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.
Frequently Asked Questions
Q: Does the Magpul MBUS Gen 2 front sight fit all Picatinny rails?
A: The MBUS Gen 2 clamps to most MIL-STD-1913 Picatinny and STANAG 4694 railed handguards. It will not fit M-LOK, KeyMod, or other direct-attach slots without an adapter rail section.
Q: What is the difference between MBUS Gen 2 and the original MBUS front sight?
A: The Gen 2 features a reduced size for better compatibility with magnified optics and a lower profile when stowed. Both use impact-resistant polymer and spring-loaded deployment, but the Gen 2 measures 1.5 inches deployed versus the longer footprint of the original. The Gen 2 also incorporates protective wings around the front sight post.
Q: Can I use the MBUS Gen 2 front sight with a red dot or LPVO?
A: Yes. The compact deployed length and low stowed height make the MBUS Gen 2 compatible with most red dots, prism scopes, and low-power variable optics. The sight provides standard A2 height-over-bore, so you can set it up for lower-third co-witness with many red dot mounts or use it independently as a backup.
Q: How much does the Magpul MBUS Gen 2 front sight weigh?
A: The sight weighs 1.2 ounces with the included mounting hardware. That light weight minimizes the effect on rifle balance when mounted at the front of your handguard.
Q: Will the FDE finish on the MBUS Gen 2 match my other Flat Dark Earth parts?
A: Flat Dark Earth shades vary across manufacturers and production runs because polymer and anodized aluminum accept dye differently. The MBUS Gen 2 FDE may not match every other FDE component on your rifle. If exact color matching matters to you, send us a message to discuss your build.
Additional information
| Weight | 0.4 lbs |
|---|---|
| Features | Impact resistant polymer construction provides light weight and resists operational abuse Spring-loaded flip up sight easily activated from either side or by pressing the top Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons Protective wings shield the spring-locking A2 front sight post Weight, w/ hardware: 1.2 oz. Height above rail, stowed: ~0.51 in. Length, stowed: 2.6 in. Length, deployed: 1.5 in. Reduced size for greater optics compatibility Spring-locking front sight post holds consistent elevation |
| Finish |
Reviews
No reviews on this item yet. Own one? Tell other shooters how it runs.