Hogue Grips, Overmolded Grip, AR15/M16, Rubber, Finger Grooves, OD Green

Product Description

The Hogue Grips Overmolded Grip for AR15/M16 is a rubber pistol grip with finger grooves, finished in OD Green. Hogue designed this grip to give shooters a secure hold on the AR15 and M16 platform through an overmolded rubber construction that wraps around a rigid core.

The finger grooves guide hand placement for repeatable grip alignment. The overmolded rubber surface provides traction in wet conditions and reduces felt recoil compared to hard polymer grips.

This grip suits AR15 and M16 shooters looking to upgrade from standard-issue grips or to match a specific color scheme.

Key Facts

• Brand: Hogue
• Firearm Type: AR-15/M16
• Finish: OD Green
• SKU: HOG-15001

How the Overmolded Grip Fits AR15 Rifles

The AR15 and M16 share the same lower receiver grip mounting pattern, so this Hogue grip installs on both platforms using the standard grip screw that threads into the lower receiver’s grip tang. Remove the existing grip, slide this one into place, and secure it with the grip screw.

Check that your lower receiver is a standard AR15 or M16 type before ordering. Some proprietary lowers use non-standard grip mounting. Call 817-393-4000 if you need to confirm compatibility with your specific build.

Finger Grooves and Rubber Construction

Finger grooves molded into the grip body provide indexed positions for your fingers. This creates a consistent grip angle and hand placement from one shooting session to the next, which many shooters find helps with trigger control.

The overmolded rubber wraps around a rigid internal frame. This construction combines the structural strength needed to support the lower receiver’s weight with the texture and cushioning of rubber. The rubber compound is durable enough for range use and carries without flaking or peeling under normal handling.

OD Green Finish for AR15 Builds

OD Green (olive drab green) is a standard military color that pairs with earth-tone builds, camouflage patterns, and FDE (flat dark earth) furniture. If you’re building or updating an AR15 with a specific color scheme, this grip provides a factory finish option beyond black.

Browse additional grips, pads, and stocks if you need to match other finish colors or textures across your rifle’s furniture.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL/SOT dealer and gunsmith shop in Roanoke, Texas, serving North Texas and the DFW area since 2007. Lance Rankin and his team offer gunsmithing services, transfers, and parts for builds and upgrades. Call 817-393-4000 to place an order or ask questions about lower parts for your AR15.

Frequently Asked Questions

Q: Does the Hogue overmolded grip fit all AR15 and M16 lowers?

A: This grip fits standard AR15 and M16 lower receivers that use the mil-spec grip mounting pattern. Most AR15 lowers on the market accept this grip, but proprietary lowers from some manufacturers may use different mounting hardware. Confirm fit by checking that your lower has a single threaded hole in the grip tang for a vertical grip screw.

Q: What are finger grooves on an AR15 grip?

A: Finger grooves are molded channels on the front of the grip that create defined positions for each finger. They guide your hand into the same placement each time you hold the rifle, which can improve consistency in trigger reach and grip angle. Some shooters prefer grooves for this repeatability, while others prefer smooth grips for flexibility in hand position.

Q: How does an overmolded rubber grip compare to a hard polymer grip?

A: An overmolded rubber grip combines a rigid internal structure with a soft rubber outer layer, while a hard polymer grip is molded from a single stiff plastic. Rubber grips generally offer more traction in wet or sweaty conditions and absorb vibration better than hard polymer. Hard polymer grips are typically slimmer and easier to clean. The choice depends on whether you prioritize grip texture and cushioning or a low-profile feel.

Q: Can I install this grip myself or do I need a gunsmith?

A: Most shooters can install an AR15 grip with basic hand tools. You need a flat-blade screwdriver or hex wrench (depending on your grip screw type) to remove the old grip screw, swap the grip, and tighten the new screw. The process takes a few minutes. If you prefer professional installation or are installing the grip as part of a larger build, Western Sport offers gunsmithing services at 817-393-4000.

Q: Is OD Green the same color as FDE or Magpul ODG?

A: OD Green is olive drab green, a darker green with brown undertones. FDE (flat dark earth) is a tan or coyote brown, not green. Magpul’s ODG (olive drab green) is similar to standard OD Green but may vary slightly in shade between manufacturers. If you need an exact color match across parts from different brands, request a physical comparison or call 817-393-4000 for guidance.

Q: Does Hogue make this grip in other colors or without finger grooves?

A: Hogue manufactures AR15 grips in multiple colors and with different surface textures and groove patterns. This specific model (SKU HOG-15001) is the OD Green version with finger grooves. For other colors or smooth-surface options, browse our full selection or call 817-393-4000 to confirm which Hogue models we carry.

Additional information