$49.95

15 in stock

4.9278 Google reviews
Shipping & returns
  • Shipping: $9.99. Most in-stock orders ship the same or next business day.
  • Returns: 30 days on unopened items, minus shipping both ways. Opened items also have a 15% restocking fee.
  • Damaged or wrong item: Tell us within 3 days and we’ll email you a free return label.
Full Return & Refund Policy
🚚 Ships to your door — most orders leave same or next business day.

Impact-resistant polymer flip-up front sight that clamps to MIL-STD-1913 Picatinny rails and provides the same height-over-bore as standard A2 irons.

SHARE THIS

Product Description

The Magpul MBUS Gen 2 Front Sight is a spring-loaded flip-up front sight made from impact-resistant polymer that mounts to MIL-STD-1913 Picatinny and STANAG 4694 railed hand guards. It provides the same height-over-bore as standard A2 iron sights and uses a spring-locking A2 front sight post for consistent elevation.

The sight activates from either side or by pressing the top. Detent and spring pressure keeps it upright during use but allows it to fold under impact without breaking. Protective wings shield the front sight post.

The Gen 2 design features a reduced footprint for better compatibility when co-witnessing with magnified optics or red dots.

Key Facts

  • Construction: Impact-resistant polymer
  • Mount: Clamps to MIL-STD-1913 Picatinny/STANAG 4694 rails
  • Height-over-bore: Same as standard A2 irons
  • Sight post: Spring-locking A2 front sight post
  • Stowed height above rail: Approximately 0.51 inches
  • Finish: Black

How the MBUS Gen 2 Front Sight Mounts and Deploys

The sight clamps directly onto any MIL-STD-1913 Picatinny or STANAG 4694 rail without tools for permanent tightening. Once mounted, you can flip it up from either side or by pressing down on the top surface. The spring-loaded mechanism snaps it into the upright position with detent pressure.

When folded, the sight sits low enough to clear most optic bodies and lens housings. The reduced Gen 2 profile was specifically designed to avoid interference with larger scopes and reflex optics mounted at standard AR heights.

Why Backup Iron Sights Matter

Even the most reliable optic can fail due to a dead battery, a broken mount, or impact damage. Flip-up backup sights let you get the rifle back into action immediately without removing the primary optic.

Because the Magpul MBUS Gen 2 matches A2 height-over-bore, it co-witnesses correctly with most red dots and holographic sights mounted at absolute or lower-third height. You’ll see both the dot and the iron sights in the same sight picture, or the irons will appear just below the optic window depending on your mount height.

Polymer construction keeps weight down compared to steel or aluminum backup sights. The spring-loaded folding mechanism lets the sight collapse under hard impact rather than snapping off, then return to battery once the obstruction clears.

MBUS Gen 2 vs. MBUS Pro

Magpul offers two main backup sight lines: the polymer MBUS Gen 2 and the steel MBUS Pro. The Gen 2 uses impact-resistant polymer to save weight and cost, while the Pro series uses steel for a narrower sight picture and greater durability under extreme use.

The Gen 2 front sight protects the A2 post with wide polymer wings. If you run your rifle hard in dusty or muddy conditions, or if you’re outfitting multiple rifles, the Gen 2 offers proven function at a lower weight penalty. For a complete iron sight setup, you’ll need a rear sight that matches the same height-over-bore.

Ordering from Western Sport

Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.

Frequently Asked Questions

Q: Will the Magpul MBUS Gen 2 front sight fit my AR-15?

A: The MBUS Gen 2 front sight clamps to any MIL-STD-1913 Picatinny or STANAG 4694 railed hand guard. If your AR-15 has a Picatinny top rail on the hand guard, it will fit. Confirm your hand guard has a continuous top rail section where you plan to mount it.

Q: Does this sight work with a red dot or magnified optic?

A: Yes, the MBUS Gen 2 front sight is designed to co-witness with optics mounted at standard AR heights. The reduced Gen 2 profile clears most optic bodies when folded, and when deployed it provides the same height-over-bore as A2 irons. Pair it with a rear sight at the same height for a complete backup system.

Q: What is the difference between MBUS Gen 1 and Gen 2?

A: The Gen 2 has a smaller, more streamlined profile for better optics clearance. The Gen 2 design reduces the overall footprint when stowed, making it easier to mount behind or in front of larger scopes and red dots without interference.

Q: How do I activate the MBUS Gen 2 front sight?

A: You can flip the sight up from either side with your thumb or by pressing down on the top surface. The spring-loaded mechanism locks it upright with detent pressure. To fold it, press the release tabs on both sides and push it down.

Q: Is the MBUS Gen 2 front sight durable enough for hard use?

A: The impact-resistant polymer construction holds up to operational abuse and normal field use. The detent and spring system allows the sight to fold under impact rather than break, then return to the upright position. For extreme duty or the narrowest sight picture, consider the steel MBUS Pro line instead.

Q: Can I adjust the MBUS Gen 2 front sight for elevation?

A: Yes, the MBUS Gen 2 uses a spring-locking A2 front sight post that you adjust for elevation using a front sight adjustment tool. Turn the post clockwise to lower point of impact or counterclockwise to raise it. The spring-locking design holds your elevation setting consistently.

Additional information

Weight 0.4 lbs
Features

Impact resistant polymer construction provides light weight and resists operational abuse Spring-loaded flip up sight easily activated from either side or by pressing the top Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons Protective wings shield the spring-locking A2 front sight post Weight, w/ hardware: 1.2 oz. Height above rail, stowed: ~0.51 in. Length, stowed: 2.6 in. Length, deployed: 1.5 in. Reduced size for greater optics compatibility Spring-locking front sight post holds consistent elevation

Finish

Reviews

No reviews on this item yet. Own one? Tell other shooters how it runs.

Store rating from our customers:

4.9278 Google reviews
Be the first to review “Magpul MBUS Gen 2 Front Sight – Black”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.