Odin Works Lower Parts Kit

Product Description

The Odin Works Lower Parts Kit is a complete assembly kit for finishing AR-15 lower receivers. This kit provides the trigger, pins, springs, detents, and selector components needed to make a stripped lower receiver functional. It’s designed for builders who want reliable internal parts without sourcing each component separately.

Lower parts kits streamline the build process by bundling all the small parts in one package. The Odin Works kit suits both first-time builders and experienced gunsmiths working on custom projects.

Key Facts

• Product name: Odin Works Lower Parts Kit
• SKU: OW-ACC-LPK
• Category: Lower Parts Kit
• Use: AR-15 lower receiver assembly

What’s in a Lower Parts Kit and Why It Matters

A lower parts kit typically contains the trigger assembly, hammer, disconnector, selector switch, magazine catch, bolt catch, takedown pins, pivot pins, trigger guard, and the springs and detents that hold everything in place. These are the moving parts that make a lower receiver function.

Without these components, a stripped lower is just a machined piece of aluminum. The quality of the parts determines how smoothly the trigger breaks, how cleanly the magazine releases, and how reliably the safety engages. Send us a message to confirm specific components in this Odin Works kit.

Compatibility with AR-15 Lower Receivers

The Odin Works Lower Parts Kit is built to mil-spec dimensions, which means it should fit any standard AR-15 lower receiver. That covers both forged and billet lowers from most manufacturers.

Some specialized lowers use proprietary trigger pockets or extended controls. If you’re building on anything other than a standard lower, verify fitment before ordering.

Installation Tools and Gunsmithing Support

Installing a lower parts kit requires roll-pin punches, a hammer, needle-nose pliers, and sometimes a vise block to hold the lower steady. The trigger guard and bolt catch roll pins are notorious for walking out of alignment during installation.

If you’re not comfortable driving roll pins without marring the finish, Western Sport offers gunsmithing services on site. Lance Rankin and the team can install the kit or walk you through the process. We’re.

Ordering from Western Sport

Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.

Frequently Asked Questions

Q: Will the Odin Works Lower Parts Kit fit my AR-15 lower receiver?

A: The Odin Works Lower Parts Kit is designed to fit standard mil-spec AR-15 lower receivers from most manufacturers. If you have a billet lower or a receiver with custom dimensions, send us a message to confirm fitment before ordering.

Q: Can I install this lower parts kit myself?

A: Installing a lower parts kit is possible for home builders with basic tools like roll-pin punches, a hammer, and pliers. The process involves driving small pins and installing springs under tension, which can be tricky. If you’re unsure, Western Sport offers gunsmithing servicesto handle the installation.

Q: Does this kit work with mil-spec or commercial buffer tubes?

A: Lower parts kits are independent of buffer tube type. The Odin Works kit installs into the lower receiver itself, and any mil-spec or commercial buffer tube will thread into the receiver normally after the kit is in place.

Q: Do I need any additional parts to complete my lower receiver?

A: A lower parts kit covers the internal components. You’ll still need a stock assembly, buffer tube, buffer, buffer spring, and grip to finish the lower. Send us a message if you need help identifying missing parts for your build.

Q: Can I use this kit with an 80 percent lower I finished myself?

A: Lower parts kits install into any AR-15 lower that has been machined to spec, including 80 percent lowers. The critical factor is that the fire control pocket, magazine well, and pin holes are cut to mil-spec dimensions.