Troy M-Lok Mount QD Black

Product Description

The Troy M-Lok Mount QD Black is a quick-detach sling mount designed to install directly into M-LOK compatible handguards and rail systems. It accepts standard push-button QD sling swivels and provides a flush, low-profile attachment point.

This mount installs into any M-LOK slot on your handguard. It gives you flexibility to position your sling attachment exactly where you need it. The black finish integrates cleanly with most modern rifle builds.

Shooters who run two-point slings often add one of these mounts to the front of the handguard and pair it with a rear QD socket on the receiver end plate or stock. The quick-detach mechanism lets you swap or remove the sling in seconds without tools.

Key Facts

• Brand: Troy Industries
• Model: M-Lok Mount QD Black
• Mount Type: Quick Detach (QD)
• Finish: Black
• SKU: TY-SMOU-MQ1-00BT-00

How the Troy M-Lok Mount QD Installs

M-LOK mounting hardware uses a clamping system that pulls the accessory tight against the inside of the slot. The mount slides into any M-LOK slot on your handguard, then you tighten the mounting hardware from the front. This creates a secure attachment without adding bulk or sharp edges.

Most shooters position the mount on the side or bottom of the handguard, depending on whether they prefer the sling to hang from the three o’clock, six o’clock, or nine o’clock position. You can reposition it anytime by loosening the mount and sliding it to a different slot.

Troy M-Lok vs. Quad Rail Sling Mounts

Older quad rail handguards use continuous Picatinny rails on all four sides. Sling mounts for quad rails typically clamp onto the Picatinny slots and sit higher off the surface. The Troy M-Lok Mount QD, by contrast, nests into the M-LOK slot and sits nearly flush with the handguard surface.

M-LOK systems became popular because they reduce weight and eliminate sharp rail edges where you don’t need them. If you’re upgrading from a quad rail to an M-LOK handguard, you’ll need to replace any Picatinny-mounted accessories with M-LOK compatible versions. Browse our handguards and forends or parts to see what’s compatible with your build.

What to Confirm Before You Order

Make sure your handguard has M-LOK slots, not KeyMod or Picatinny rails. The three systems are not interchangeable. M-LOK slots are rectangular with a narrow opening and a wider cavity inside.

This mount accepts standard QD sling swivels. If you’re ordering a new sling, confirm it uses a push-button QD swivel rather than a loop or HK-style clip. Call 817-393-4000 if you need help verifying compatibility with your specific handguard or sling hardware.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL/SOT dealer and gunsmith shop serving North Texas and the DFW area since 2007. Owner and gunsmith Lance Rankin and the team handle transfers, custom builds, and firearms service on site. Call 817-393-4000 with questions about fit, installation, or to place an order.

Frequently Asked Questions

Q: Will the Troy M-Lok Mount QD fit my handguard?

A: It fits any handguard or rail system with M-LOK slots. M-LOK is a standardized mounting system, so the mount will work across brands as long as the handguard uses M-LOK rather than KeyMod or Picatinny. If you’re unsure which system your handguard uses, call 817-393-4000 and we’ll help you confirm.

Q: Does this Troy mount work with Picatinny quad rails?

A: No, this mount is designed specifically for M-LOK slots and will not attach to Picatinny or quad rail systems. Quad rails require a different style of QD mount that clamps onto the Picatinny slots. If you have a quad rail, you’ll need a Picatinny-compatible QD mount instead.

Q: What sling swivels work with this QD mount?

A: The mount accepts standard push-button quick-detach sling swivels. Most modern two-point slings use this style of swivel. The swivel pushes into the mount and locks in place with a spring-loaded ball detent, then releases when you press the button.

Q: Can I move the Troy M-Lok mount after I install it?

A: Yes, you can reposition it by loosening the mounting hardware, sliding the mount to a different M-LOK slot, and retightening. This lets you adjust sling placement based on how you hold the rifle or switch between positions for different shooting drills.

Q: Where should I position a QD sling mount on my handguard?

A: Most shooters place the front sling mount somewhere between the midpoint and the front end of the handguard. Side mounting at three or nine o’clock keeps the sling out of the way during prone shooting. Bottom mounting at six o’clock works well for quick transitions. Try a few positions to see what feels natural with your grip and shooting style.

Q: Does Troy Industries warranty this mount?

A: Call 817-393-4000 to confirm current warranty terms and coverage for this specific mount. We can walk you through the process if you have any issues or need support after your purchase.

Additional information