Vortex Crossfire II 1Inch 3-9×40 V-Brite MOA

Product Description

The Vortex Crossfire II 3-9×40 V-Brite MOA is a variable magnification riflescope with a 1-inch tube, 3-9x magnification range, and an illuminated MOA reticle designed for hunting rifles and precision shooting platforms.

This scope bridges the gap between rimfire plinking and centerfire hunting. The 3-9x range handles whitetail at distance and target work at the range. The V-Brite illuminated reticle stays visible in low light without washing out in bright conditions.

The 1-inch tube diameter fits standard scope rings available for most hunting rifles and bolt-action platforms. The MOA reticle gives you holdover reference points without cluttering the field of view.

Key Facts

• Brand: Vortex
• Model: Crossfire II CF2-31025
• Magnification: 3-9x
• Reticle: MOA with V-Brite illumination
• Tube Diameter: 1 inch
• Objective Lens: 40mm

What the 3-9x Magnification Range Does

A 3-9x variable scope covers most shooting tasks without forcing you into one specialty. At 3x you get fast target acquisition and a wide field of view for close shots or brush hunting. At 9x you resolve detail at distance for precise shot placement on deer-sized game or paper targets.

This magnification range suits general-purpose hunting rifles chambered in .243, .270, .308, or .30-06. It also works well on rimfire trainers when you want more magnification than a red dot but less bulk than a tactical optic.

Understanding the V-Brite Illuminated MOA Reticle

The V-Brite feature adds battery-powered illumination to the center of the MOA reticle. You can dial the brightness up in dawn or dusk conditions when a black reticle disappears against dark fur or timber.

The MOA reticle uses subtensions measured in minutes of angle. Each MOA subtends approximately one inch at 100 yards. This lets you estimate holdover for longer shots or dial corrections when zeroing without needing a mil-dot conversion chart.

Call 817-393-4000 to confirm turret type, click values, and eye relief before ordering.

Mounting a 1-Inch Tube Riflescope

The 1-inch tube requires scope rings sized for 1-inch diameter tubes, not 30mm rings. Most traditional hunting rifles and many bolt-action rimfires use 1-inch rings. Picatinny rail mounts and Weaver-style rings both come in 1-inch versions.

Ring height depends on the objective bell diameter and the clearance between your scope and the barrel or receiver. A 40mm objective usually sits well in medium-height rings on standard hunting rifles. Larger bolt knobs or oversized bolt handles may require high rings.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL/SOT dealer serving North Texas and the DFW area since 2007. We handle transfers, special orders, and gunsmithing on site. Our staff can help you match rings and mounts to your rifle platform. Call 817-393-4000 or visit our Roanoke location to discuss your setup.

Frequently Asked Questions

Q: What rifles work with the Vortex Crossfire II 3-9×40?

A: The Vortex Crossfire II 3-9×40 fits any rifle drilled and tapped for scope bases or equipped with a Picatinny rail, provided you use 1-inch scope rings. It pairs well with bolt-action hunting rifles, lever guns with top ejection ports, and rimfire trainers. Confirm ring height and rail compatibility for AR-pattern rifles before mounting.

Q: How does the MOA reticle compare to a BDC reticle?

A: An MOA reticle uses fixed angular measurements that apply to any cartridge once you know your drop in MOA at distance. A BDC reticle is calibrated for specific loads and velocities. The MOA reticle offers more flexibility across different calibers and handloads, but it requires you to calculate holdovers rather than using pre-marked reference points.

Q: Do I need 30mm rings or 1-inch rings for this scope?

A: You need 1-inch scope rings for the Vortex Crossfire II CF2-31025. The tube diameter is 1 inch. Using 30mm rings will not secure the scope properly. Always match ring diameter to tube diameter.

Q: Can I use this scope for long-range shooting?

A: The 3-9x magnification works for hunting ranges out to 300 yards on deer-sized targets and for target shooting at moderate distances. Beyond that, most shooters prefer higher magnification to resolve small aiming points and read wind. This scope is built for general hunting and range work, not dedicated long-range precision.

Q: What is the difference between the Crossfire II and the Diamondback series?

A: The Crossfire II and Diamondback lines are both entry-level to mid-range riflescopes from Vortex. Specific differences in glass quality, coatings, and turret design vary by model. Call 817-393-4000 and we can walk through the trade-offs based on your budget and intended use.

Q: Does Western Sport mount and bore-sight scopes purchased in the store?

A: Western Sport offers gunsmithing services including scope mounting and bore-sighting at our Roanoke location. Our gunsmiths can lap rings, torque bases to spec, and get you on paper before you head to the range. Call 817-393-4000 to schedule an appointment or ask about current service times.

Additional information