Sale!

Original price was: $329.99.Current price is: $239.99.

Out of stock

🚚 Not on our shelf today — order now to reserve yours, or call (817) 393-4000 for a current lead time. Free local pickup in Roanoke, TX when it arrives.
Product Code: vortex_diamondback_tactical_DBK-RIM Categories: , , Tags: , , , , , , Brand:

Vortex Diamondback 2-7×35 rimfire scope optimized for .22 LR and other rimfire cartridges, with a V-Plex reticle calibrated to 50 yards.

SHARE THIS

Product Description

The Vortex Diamondback 2-7×35 Rimfire V-Plex is a variable magnification riflescope purpose-built for rimfire rifles and airguns. It gives shooters 2x to 7x magnification in a 35mm objective housing, letting you move from close plinking to 100-yard small-game work without changing optics.

This scope uses a V-Plex reticle zeroed at 50 yards, a distance that matches typical .22 LR trajectory. The MOA turrets let you dial elevation and windage adjustments in familiar one-minute increments.

Rimfire scopes differ from centerfire models in how they handle recoil and parallax. A .22 LR shoots a light bullet with minimal shoulder energy, but the reciprocating bolt and light spring tension create unique vibration. Scopes designed for centerfire rifles can lose zero quickly on a rimfire platform because the internal lenses are sprung for heavier recoil impulse.

Key Facts

  • Brand: Vortex
  • Model: Diamondback Rimfire V-Plex (50 yd) MOA
  • Magnification Range: 2-7x
  • Objective Diameter: 35mm
  • Reticle Type: V-Plex MOA
  • SKU: vortex_diamondback_tactical_DBK-RIM

Why Rimfire-Specific Glass Matters

A centerfire scope mounted on a .22 rifle will usually function, but the spring rates inside are mismatched. Rimfire cartridges generate reverse recoil as the bolt cycles backward, and the light overall mass of most rimfire rifles means more felt vibration per shot. Over a few hundred rounds, a scope not rated for rimfire use will walk its zero or develop image shift.

The Vortex Diamondback rimfire line is tuned internally for this firing cycle. That makes it a better choice than mounting surplus centerfire glass, even when the centerfire optic costs more.

What the 50-Yard Zero Means in Practice

The V-Plex reticle is calibrated so the center crosshair sits on point of impact at 50 yards with standard-velocity .22 LR ammunition. Inside that distance, your hold will be slightly high; beyond 50 yards, you hold over or dial the turret. Most shooters zero at 50 because it splits the difference between barn-door plinking at 15 yards and squirrel hunting at 75.

If you shoot exclusively at 25 yards or prefer a 100-yard zero, the MOA turrets let you re-zero without tools. Each click moves the point of impact by roughly one inch at 100 yards, half that at 50.

Choosing Magnification for Rimfire Work

A 2-7x range covers most rimfire applications. At 2x you get a wide field of view for fast target transitions in action shooting or pest control. At 7x you have enough detail to place shots on one-inch targets at 100 yards or sort groups during load testing.

Higher magnification sounds appealing, but it narrows the exit pupil and makes it harder to find your sight picture quickly. For rifles that spend time in both backyard plinking and small-game field carry, a 2-7x or 3-9x scope offers more versatility than a fixed 4x or a high-magnification tactical design.

Western Sport stocks a full selection of riflescopes for rimfire, centerfire, and long-range applications, along with the rings and bases to mount them properly.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL and SOT dealer serving North Texas and the Dallas-Fort Worth area since 2007. Our gunsmith, Lance Rankin, handles scope mounting, bore-sighting, and custom builds on site. We can order any item in the Vortex catalog and walk you through the details that matter for your rifle. Call 817-393-4000 with questions or to place an order.

Frequently Asked Questions

Q: Will the Vortex Diamondback 2-7×35 rimfire scope work on a centerfire rifle?

A: It will mount and function, but it is not designed for centerfire recoil and may lose zero or suffer internal damage over time. The springs and lens assemblies are tuned for the lighter impulse of rimfire cartridges. Use a scope rated for centerfire if you are mounting it on a .223, .308, or any cartridge with a primer in the center of the case head.

Q: What is the difference between the V-Plex reticle and a mil-dot or BDC reticle?

A: The V-Plex is a simple duplex crosshair with thick outer posts that taper to a fine center intersection. It offers a clean sight picture without ranging marks or holdover dots. Mil-dot reticles have evenly spaced dots for range estimation, and BDC reticles have additional aiming points calibrated to specific bullet trajectories. The V-Plex is faster to use at close range and less cluttered for general shooting.

Q: Does the Vortex Diamondback 2-7×35 have MOA or MRAD turrets?

A: This model uses MOA (minute of angle) turrets. Each click adjusts point of impact by one minute of angle, which translates to approximately one inch at 100 yards. The reticle and turrets both use MOA, so your measurements stay consistent.

Q: Can I use this scope on an air rifle or pellet gun?

A: Yes, rimfire-rated scopes handle the unique recoil pattern of spring-piston airguns better than most centerfire optics. The bidirectional recoil from a springer is similar in character to rimfire bolt movement, and the Diamondback rimfire series is commonly used on both .22 LR rifles and air rifles.

Q: What ring height do I need to mount the Vortex Diamondback 2-7×35 on a rimfire rifle?

A: Ring height depends on your rifle’s receiver height, the diameter of the barrel at the mounting point, and whether you want a cheek weld or chin weld. Most rimfire rifles with grooved receivers use medium or low rings. Call us at 817-393-4000 with your rifle model and we can confirm the correct ring size and help you select a quality mount.

Q: How do I know if this scope will fit my specific rimfire rifle?

A: The Vortex Diamondback 2-7×35 rimfire scope uses standard one-inch scope rings. If your rifle has a Picatinny rail, Weaver-style bases, or grooved receiver cuts, a set of rings matched to that mounting system will work. Ruger 10/22 rifles, CZ 455 and 457 models, Savage Mark II series, and most bolt-action .22 rifles accept this scope with the appropriate rings. Call 817-393-4000 and we will walk you through the mounting options for your rifle.

Included in the Box
  • Removable lens covers
  • Lens cloth
Magnification 2-7x
Objective Lens Diameter 35 mm
Eye Relief 3.1 inches
Field of View 64.3-19.3 ft/100 yds
Tube Size 1 inch
Turret Style Capped
Adjustment Graduation 1/4 MOA
Travel Per Rotation 15 MOA
Max Elevation Adjustment 100 MOA
Max Windage Adjustment 100 MOA
Parallax Setting 50 yards
Length 11.6 inches
Weight 14.2 oz
Product Manual (PDF) Download
Parts Diagram (PDF) Download

Additional information

Magnification

Reticle

Reviews

There are no reviews yet.

Be the first to review “Vortex Diamondback 2-7×35 RIMFIRE V-Plex (50 yd) MOA”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

In Stock Now — Comparable Options

This item is out of stock. These are on the shelf today and ship or transfer the same way. Not sure which is the right swap? Call 817-393-4000 and we will tell you straight.