Daniel Defense DDM4 V7 RattleCan Rifle, 5.56 NATO, No Magazine

Product Description

The Daniel Defense DDM4 V7 RattleCan Rifle, part number 02-128-02267-067, is a semi-automatic 5.56 NATO rifle with a 16″ cold hammer forged Government profile barrel, mid-length gas system and MFR 15.0 M-LOK rail in the RattleCan finish, supplied without a magazine.

This part number exists so that the rifle can reach buyers in places where magazine capacity is capped: Daniel Defense leaves the magazine out and a compliant one is supplied where the rifle is delivered. If your area places no limit on capacity, the standard RattleCan V7 is the listing to use.

Key Facts

• Model: DDM4 V7 RattleCan
• Manufacturer Part Number: 02-128-02267-067
• Caliber: 5.56mm NATO
• Barrel: 16″, cold hammer forged, Government profile
• Twist Rate: 1:7
• Gas System: Mid-length
• Rail: Daniel Defense MFR 15.0 M-LOK, free floating
• Muzzle Device: Daniel Defense Flash Suppressor, 1/2 x 28 TPI
• Weight: 6.2 lbs
• Finish: RattleCan
• Magazine: None supplied with this part number

Check the rules where the rifle will live

Because capacity limits are set locally and get revised, confirm the current position for your state and locality before ordering. We are glad to help you choose a magazine once you know what you are allowed — 817-393-4000. Nothing on this page should be read as legal advice.

Ordering from Western Sport in Roanoke, TX

In business since 2007, Western Sport is a licensed FFL/SOT dealer and Daniel Defense master dealer in Roanoke, Texas with a gunsmith on hand. This RattleCan V7 is a rifle and can only be transferred through a licensed FFL, ours or one closer to you. Call 817-393-4000.

Frequently Asked Questions

Q: Does the RattleCan finish change how the rifle is built?

A: No. It is a finish option on the same V7: 16″ cold hammer forged Government profile barrel, 1:7 twist, mid-length gas system and the MFR 15.0 M-LOK rail. Only the exterior appearance differs from the black version of the same rifle.

Q: Why no magazine with this part number?

A: Magazine capacity is restricted in a number of jurisdictions, so Daniel Defense builds a separate no-magazine SKU that can ship into them. The magazine is then supplied locally at whatever capacity the destination currently permits, rather than being shipped with the rifle.

Q: What capacity magazine can I use?

A: That depends entirely on where you live, not on the rifle, and the rules change. Confirm the current limit for your state and locality, then call 817-393-4000 and we will help you find a magazine that fits both the rifle and the rules.

Q: What thread pitch is under the flash suppressor?

A: 1/2 x 28 TPI, beneath the Daniel Defense flash suppressor, which is the usual 5.56 thread pitch. That makes swapping to another muzzle device or a direct-thread suppressor mount straightforward. Speak to our gunsmith on 817-393-4000 if you want that work done.

Q: Is the 16″ barrel long enough to avoid NFA paperwork?

A: Yes. A 16-inch barrel on a rifle stock puts this outside short-barrelled rifle territory, so no tax stamp is needed. It remains a rifle for transfer purposes and must go through a licensed FFL.

Q: How do I buy it if I am not local to Roanoke?

A: We ship rifles to licensed FFLs across the country. Give us your dealer’s details on 817-393-4000 and we will coordinate the transfer paperwork; you complete the background check and collect at their counter rather than ours.

Additional information