Barrett 99A1, Bolt Action Rifle, 32″ Heavy Barrel, Cerakote Finish, Black

Product Description

Barrett Model 99-416 in .416 Barrett — 32″ Heavy Barrel, Black Cerakote

The Barrett Model 99-416 is the extreme long-range specialist’s choice: a single-shot bolt-action rifle chambered in .416 Barrett — a cartridge Barrett developed specifically to push past the ballistic limits of .50 BMG at distances beyond 1,500 meters. With a 32″ heavy barrel optimized for maximum velocity, an interrupted buttress-thread bolt rated for the .416’s considerable pressures, and Barrett’s legendary build quality, the 99-416 is the rifle used when you need to win at ranges where the .50 BMG’s larger, lower-BC projectile starts losing the wind battle.

What Is .416 Barrett — and Why Does It Matter?

The .416 Barrett was developed by Barrett to solve a fundamental problem with .50 BMG at extreme range: while the .50 BMG’s 750-grain projectile has enormous energy, its relatively low ballistic coefficient (BC) means it succumbs to wind faster than smaller, more aerodynamic bullets. By necking down a .50 BMG case to accept a .416″ (10.57mm) diameter bullet, Barrett created a cartridge that:

• Pushes 400-grain bullets to ~2,950–3,200 fps from a 32″ barrel — extreme velocity with exceptional BC
• Produces dramatically less wind deflection at 1,500+ meters compared to standard .50 BMG loads
• Carries more energy per unit of cross-sectional area (higher sectional density) than .50 BMG
• Is not classified as .50 BMG under any state law — fully legal in California and states with .50 BMG restrictions

In extreme long-range (ELR) competition, where shooters regularly engage steel at 2,000–3,000+ meters, the .416 Barrett has become a benchmark cartridge. Its combination of flat trajectory, high BC projectiles, and the consistent velocity a 32″ barrel provides means fewer misses at distances where margin of error is measured in inches per MPH of wind.

The Model 99 Action: Purpose-Built for Big Cases

The Model 99 uses Barrett’s interrupted buttress-thread bolt — the same geometry found in breech-loading artillery systems. This 360° engagement distributes bolt-face pressure across the entire thread, not small locking lugs. The result is a receiver that handles the .416 Barrett’s substantial pressures reliably, extraction is smooth, and the bolt cycles quickly between shots for a single-shot design.

Specifications

The 32″ Barrel: Every Foot-Per-Second Counts at 2,000 Meters

The 32″ heavy barrel is the longest available for the Model 99-416, and at ELR distances, every 50 fps of additional muzzle velocity meaningfully reduces time of flight and wind drift correction. At 2,000 meters, a 50 fps velocity advantage translates to several inches less wind deflection in a 10 MPH crosswind — that’s the margin between a hit and a miss on ELR steel. This is why serious ELR competitors choose the 32″ configuration when pure ballistic performance matters above all else.

Legal in California and .50 BMG-Restricted States

California’s AB 50 (Penal Code §30515) and similar statutes in other states specifically restrict .50 BMG (12.7×99mm NATO) caliber semi-automatic rifles. The .416 Barrett is a distinct cartridge with a different case diameter and is not .50 BMG. The Model 99-416 is bolt-action, single-shot, and is fully legal in California and other states where .50 BMG semi-auto rifles are regulated. Always confirm transfer requirements with your FFL dealer.

Suppressor-Compatible — $0 NFA Tax Stamp Under OBBBA

The Model 99-416’s muzzle brake is threaded for Barrett’s suppressor lineup. Under the One Big Beautiful Bill Act (OBBBA), the $200 NFA tax stamp for suppressors has been eliminated, making suppressor ownership significantly more accessible. Barrett’s AML338 and AM338 suppressors (also available at Western Sport) are rated for .416 Barrett’s pressures and velocity, reducing muzzle blast and improving shooter comfort during extended range sessions.

Frequently Asked Questions

Is .416 Barrett ammunition readily available?

Availability is more limited than .50 BMG but has improved as ELR competition has grown. Barrett, Hornady, and Cutting Edge Bullets produce quality .416 Barrett loads. Hand-loading is also practical and preferred by serious ELR competitors who need custom velocity and projectile specifications. Factor in ammunition availability when choosing between the .50 BMG and .416 Barrett configurations.

How does .416 Barrett compare to .50 BMG for practical long-range shooting?

Below ~1,200 meters, the difference is modest. At 1,500–3,000 meters, the .416 Barrett’s higher-BC projectiles give it a meaningful wind-resistance advantage. The .50 BMG has significantly broader ammunition availability. If you’re shooting standard ranges and relying on factory ammunition, .50 BMG is usually the more practical choice. If you’re competing at ELR distances and willing to hand-load (or source .416 Barrett factory ammo), the 99-416 is the superior ballistic platform.

Can I use the same scope I have on my .50 BMG rifle?

Yes — the Model 99-416 uses the same integrated 20 MOA Picatinny rail as other Model 99 variants. Any scope you’ve zeroed on a .50 BMG Model 99 will mount directly. You’ll need to re-zero for .416 Barrett’s different trajectory, but the platform is physically identical.

Is a bipod included?

No. The stock has a threaded monopod receptacle compatible with Barrett’s monopod (available separately). The forend accepts Harris-style bipod adapters for most standard bipod mounts.

What makes the 32″ barrel better than a 29″ fluted barrel on this cartridge?

For .416 Barrett specifically, the 32″ barrel captures more of the propellant’s energy before the bullet exits, yielding 40–60 fps more muzzle velocity than a 29″ barrel. At ELR distances where this cartridge excels, that velocity advantage is meaningful. The 29″ fluted barrel (available in .50 BMG) trades some velocity for reduced weight and faster cooling — a reasonable tradeoff for that caliber but less optimal for the .416 Barrett’s ELR use case.

How does Western Sport handle shipping and transfer for this rifle?

We ship to your FFL dealer via common carrier. Given the rifle’s overall length (~50″ with muzzle brake), oversize freight rates apply. After purchase, we’ll confirm your FFL’s details and arrange delivery. Typical transit is 3–7 business days once transfer paperwork is set.

Why Buy the Barrett 99-416 from Western Sport?

Western Sport has been serving serious shooters in the Pacific Northwest since 1949. We carry the full Barrett Model 99 family — including both .50 BMG and .416 Barrett configurations — and our staff understands the differences between them well enough to help you choose the right one for your discipline. Whether you’re building an ELR competition setup or simply want the most technically sophisticated single-shot bolt-action available to civilian shooters, we’ll get you the right rifle and make the transfer process straightforward. Questions? Call or message us any time before you buy.

Additional information