Leupold BackCountry BackCountry Cross-Slot for Cross-Slot, Black

Product Description

The Leupold BackCountry Cross-Slot is a set of low scope rings for 1 inch scope tubes. It comes in a matte black finish and is built to fit Cross-Slot bases.

The main thing to know is the ring height. These are low rings, so the scope sits closer to the rifle than it would in a taller ring. That can suit a shooter who wants a lower scope position on the rifle. Before you order, check that your scope’s objective bell will clear the barrel and any other parts near the mount.

Who it suits

This mount is for anyone running a 1 inch scope on a rifle with a Cross-Slot base. The matte black finish keeps the look plain and low-glare, which fits most hunting setups. If your scope has a different tube diameter, these are not the right rings, so measure the tube first.

For gear that pairs with it, start with a 1 inch riflescope and a Cross-Slot base made for your rifle. A torque driver or the correct screwdriver and a bit of thread-locking compound are common extras when mounting a scope. A level and a bore-sighting tool also help you get the optic set up before you head to the range.

The Leupold part number is 175116 and the UPC is 030317019129. Use those to match the mount to your parts list if you are building a rifle setup.

Leupold BackCountry BackCountry Cross-Slot for Cross-Slot, Black Specifications

Ordering from Western Sport

Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.

Frequently Asked Questions

Q: What scope tube size do the Leupold BackCountry Cross-Slot rings fit?

A: 1 inch. These rings are made for scopes with a 1 inch tube diameter.

Q: What ring height is the Leupold BackCountry Cross-Slot?

A: Low. These are low-height rings, so check objective bell clearance over your barrel.

Q: What bases do these rings fit?

A: Cross-Slot. They are made to fit Cross-Slot bases.

Q: What finish do these Leupold rings have?

A: Matte black. The finish is flat rather than shiny.

Q: What is the manufacturer part number?

A: 175116. The UPC is 030317019129.

Warranty and Manufacturer

Covered by the Leupold factory warranty; warranty terms come from Leupold.

Additional information