Odin Works XMR 2 Extended Magazine Release (FDE)

Product Description

The Odin Works XMR 2 Extended Magazine Release (FDE) is an oversized magazine release button designed to replace the standard magazine release on AR-15 pattern lower receivers. It provides a larger contact surface for faster reloads without shifting your grip.

An extended magazine release reduces the time and motion required to drop a magazine. The larger button is easier to reach under stress and works well with gloves or cold hands.

This component installs in the same threaded hole as your factory magazine catch. It pairs with standard magazine catch springs and buttons already in your lower.

Key Facts

• Brand: Odin Works
• Product: XMR 2 Extended Magazine Release
• Finish: FDE
• Category: Lower Parts

How the XMR 2 Compares to Standard Magazine Releases

Factory AR-15 magazine releases require you to shift your firing grip or rotate the rifle to reach the button. Extended magazine releases bring the paddle surface outward and often enlarge it.

The trade-off is that an extended release can be activated unintentionally if the rifle is pressed against gear or a barrier. Shooters who frequently work in tight spaces or use plate carriers often prefer a low-profile or ambidextrous release instead.

Test the button height against your own shooting position and gear before committing to one style. What works on a competition rifle may snag on a duty setup.

Installation and Compatibility

The XMR 2 threads into the magazine catch hole on any mil-spec AR-15 lower receiver. You will reuse your existing magazine catch spring and button unless you choose to replace them at the same time.

Installation requires a punch or screwdriver to depress the catch while you unthread the old release and thread in the new one. No fitting or gunsmithing is required for a standard lower. Send us a message if you are unsure whether this component fits your specific lower receiver.

Ordering from Western Sport

Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.

Frequently Asked Questions

Q: Will the Odin Works XMR 2 fit my AR-15 lower?

A: The XMR 2 fits any mil-spec AR-15 lower receiver with a standard threaded magazine catch hole. It replaces the factory magazine release button and threads into the same position. If you have a billet or proprietary lower, send us a message to confirm compatibility before ordering.

Q: What does FDE finish mean on the XMR 2?

A: FDE stands for Flat Dark Earth, a tan or earth-tone finish common on AR components. The finish on this magazine release is FDE as specified by Odin Works. It is designed to match other FDE-finished parts on your build.

Q: How does an extended magazine release work on an AR-15?

A: An extended magazine release enlarges the paddle surface and moves it outward from the receiver. This lets you activate the magazine catch with less hand movement, which speeds up reloads. The larger button is also easier to operate with gloves or in awkward shooting positions.

Q: Can I install the XMR 2 myself or do I need a gunsmith?

A: Most shooters install an extended magazine release at home using a punch or screwdriver to depress the catch spring while threading the new button in place. No fitting or machining is required on a standard lower. If you prefer professional installation, Western Sport offers gunsmithing services.

Q: How do I know if an extended mag release is right for my setup?

A: Extended releases work well for competition and range shooting where fast reloads matter. They are less ideal if you frequently shoot from prone, use bulky gear, or press the rifle against barriers. The larger button can catch on equipment or activate unintentionally. Consider your typical shooting environment before choosing an extended over a low-profile or ambidextrous release.

Additional information