Vortex Crossfire II 1Inch 3-9×50 Dead-Hold BDC

Product Description

The Vortex Crossfire II 3-9×50 Dead-Hold BDC is a variable-power riflescope designed for hunting and recreational shooting where accurate holdovers at longer ranges matter. The Dead-Hold BDC reticle provides aim points for multiple distances without requiring adjustments to the turret.

This 1-inch tube riflescope offers 3-9x magnification and a 50mm objective lens. The Dead-Hold BDC reticle works with a range of centerfire rifle cartridges by providing hash marks and circles that correspond to specific yardages when properly zeroed.

Vortex riflescopes are built for hunters and shooters who need reliable glass in the field. The Crossfire II series balances optical performance with practical features for all-day carry and use.

Key Facts

• Model: Vortex Crossfire II 1Inch 3-9×50 Dead-Hold BDC
• Magnification: 3-9x
• Reticle: Dead-Hold BDC
• SKU: vortex_crossfire_ii_CF2-31011

How the Dead-Hold BDC Reticle Works

A bullet drop compensator reticle gives you multiple aiming points stacked vertically below the center crosshair. Each hash mark or circle represents a hold point for a specific distance, typically in 100-yard increments. Once you zero the rifle at your chosen distance—usually 100 or 200 yards—you can use the lower aiming points for shots at 300, 400, or 500 yards without dialing the turret.

The Dead-Hold BDC reticle is designed around common centerfire ballistics. Performance varies by cartridge, bullet weight, and muzzle velocity, so confirm your holds at the range. Vortex provides ballistic charts and online tools to help you match the reticle to your specific load.

What the 50mm Objective Lens Delivers

A 50mm objective lens gathers more light than smaller objectives, which extends usable shooting time in low light. Dawn and dusk are prime hunting hours, and the larger objective helps you identify targets and place shots when smaller scopes would be too dim.

The tradeoff is added weight and a higher mounting position. You may need medium or high riflescope rings depending on your rifle’s stock design and the bell diameter. Measure clearance over the barrel before mounting.

1-Inch Tube and Mounting Considerations

This Crossfire II uses a 1-inch main tube diameter. One-inch rings are widely available and generally cost less than 30mm options. Most hunting rifles and many tactical platforms accept 1-inch tubes without issue.

Check ring height to ensure the objective clears your barrel and the ocular bell clears your charging handle or bolt. If you run a rail with multiple slots, position the scope to achieve proper eye relief before tightening rings. Call 817-393-4000 if you need help selecting rings or bases for your specific rifle.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL/SOT dealer and gunsmith shop serving North Texas and the DFW area since 2007. Owner and gunsmith Lance Rankin and his team handle transfers, custom builds, and optics installation. Call 817-393-4000 to place an order or ask about mounting services.

Frequently Asked Questions

Q: What rifles work with the Vortex Crossfire II 3-9×50?

A: The Vortex Crossfire II 3-9×50 fits any rifle with a Weaver or Picatinny rail or two-piece bases that accept 1-inch rings. Popular platforms include bolt-action hunting rifles in calibers like .308, .30-06, 6.5 Creedmoor, and .270. Confirm ring height based on your stock and barrel profile to ensure the 50mm objective clears without contact.

Q: How far can I shoot accurately with the Dead-Hold BDC reticle?

A: Maximum effective range depends on your rifle, cartridge, and shooting skill, not the reticle alone. The Dead-Hold BDC provides aiming points typically calibrated for 100-yard increments out to 500 or 600 yards with common hunting cartridges. Zero the rifle at 100 or 200 yards, then verify actual drop at each distance with your specific ammunition.

Q: Does the Vortex Crossfire II have illuminated reticle options?

A: This Crossfire II model features a non-illuminated Dead-Hold BDC reticle. The reticle remains visible in most hunting light conditions without batteries or electronics. If you need an illuminated option, other Vortex lines offer that feature—call 817-393-4000 and we can help you find the right scope.

Q: What is the difference between 1-inch and 30mm scope tubes?

A: The main difference is the tube diameter, which affects ring selection and internal adjustment range. A 1-inch tube is lighter and uses less expensive rings. A 30mm tube typically allows more elevation and windage travel inside the scope, which matters for long-range shooting or heavily sloped terrain. For most hunting applications within 500 yards, a 1-inch tube provides ample adjustment.

Q: Can I use this Crossfire II for AR-15 or MSR shooting?

A: Yes, the Vortex Crossfire II 3-9×50 mounts to any AR-15 or modern sporting rifle with a Picatinny top rail and 1-inch rings. Choose ring height to clear your charging handle and achieve proper eye relief. The Dead-Hold BDC reticle works well with 5.56 or .223 loads if you confirm holdovers at distance, though it was designed around centerfire hunting cartridges.

Q: How do I zero the Vortex Crossfire II and calibrate the BDC holdovers?

A: Zero the rifle at your chosen distance, typically 100 or 200 yards, using the center crosshair. Once zeroed, shoot groups at 300, 400, and 500 yards to see which hash marks or circles correspond to each distance with your specific load. Adjust your aim points based on observed impact. Vortex offers online ballistic calculators to estimate holds, but field verification is essential for accuracy.

Additional information