Vortex Razor HD GEN II-E VMR-2 MRAD

Product Description

The Vortex Razor HD GEN II-E VMR-2 MRAD is a first-focal-plane riflescope designed for precision rifle shooting where holdover calculations and ranging accuracy matter most. This optic uses an MRAD reticle that scales with magnification, keeping subtensions consistent across the power range.

First-focal-plane riflescopes place the reticle in front of the magnification assembly. That means the VMR-2 reticle grows and shrinks with your target as you adjust power, so each hash mark represents the same angular measurement whether you’re at low or high magnification. For shooters who range, calculate wind, or dial corrections in milliradians, this design eliminates the need to remember which magnification setting your reticle is calibrated for.

The MRAD reticle system is common in precision rifle competition and long-range shooting because it simplifies math. One milliradian equals roughly 3.6 inches at 100 yards, and the linear scaling makes it easier to estimate distance, measure target size, and communicate corrections with a spotter.

Key Facts

• Brand: Vortex
• Model: Razor HD GEN II-E VMR-2 MRAD
• Reticle: MRAD
• SKU: vortex_razor_hd_gen_II_E_RZR-16009

Who the Razor HD Gen II-E Is For

This riflescope suits precision rifle shooters who dial elevation and windage adjustments in milliradians. If you compete in PRS, practice long-range marksmanship, or hunt at extended distances where precise holdovers matter, an MRAD reticle paired with MRAD turrets keeps your system consistent.

Shooters who prefer MOA adjustments or simpler duplex reticles will find better fits elsewhere in the riflescopes category. The VMR-2 reticle includes wind dots, ranging brackets, and elevation holds that require familiarity with milliradian-based ballistic calculations.

First-Focal-Plane vs. Second-Focal-Plane

In a first-focal-plane scope like the Razor HD GEN II-E, the reticle is positioned ahead of the magnification lenses. This means the reticle appears larger at high power and smaller at low power, always maintaining the same relationship to the target.

Second-focal-plane scopes keep the reticle the same visual size regardless of magnification, but the hash marks only correspond to accurate measurements at one specific power setting—usually the highest. If you dial your magnification down, your holdovers and ranging calculations go out the window unless you do the math to compensate.

First-focal-plane designs cost more to manufacture because the reticle must remain sharp and visible across the entire magnification range. For shooters who regularly change magnification mid-string or need to range targets at any power level, that trade-off is worthwhile.

What to Confirm Before You Order

The product name tells you the reticle type—VMR-2 MRAD—but does not specify magnification range, tube diameter, objective lens size, or turret style. Those details matter when choosing rings, confirming scope height, and ensuring the optic fits your rifle and shooting style. Call 817-393-4000 to confirm specifications before you order.

If you’re building a precision rifle system, consider whether you need optics with zero-stop turrets, locking windage, or illuminated reticles. The Gen II-E designation within the Vortex Razor HD line often denotes specific feature sets, but the exact configuration should be verified by phone.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL/SOT dealer serving the North Texas and DFW area since 2007. Owner and gunsmith Lance Rankin handles transfers, special orders, and gunsmithing services on site in Roanoke. Call 817-393-4000 to ask about this riflescope, confirm specifications, or place an order.

Frequently Asked Questions

Q: What does MRAD mean on the Vortex Razor HD GEN II-E VMR-2?

A: MRAD stands for milliradian, the angular measurement system used by the reticle and turret adjustments on this riflescope. One milliradian equals approximately 3.6 inches at 100 yards, and the reticle hash marks are spaced in milliradian increments for holdover, windage correction, and ranging. Shooters who use ballistic calculators set to milliradians will find the VMR-2 reticle matches their data directly.

Q: Is the Vortex Razor HD Gen II-E a first-focal-plane or second-focal-plane scope?

A: The Razor HD GEN II-E is a first-focal-plane riflescope. The VMR-2 reticle is positioned ahead of the magnification assembly, so it scales with your target as you change power. This keeps the milliradian measurements accurate at any magnification setting, which is critical for precision shooting where you need to range or hold for wind at varying power levels.

Q: What kind of shooting is the VMR-2 MRAD reticle best for?

A: The VMR-2 MRAD reticle is designed for precision rifle shooting at long range, including competitive PRS matches, tactical applications, and hunting where accurate holdovers and wind calls are required. The reticle includes elevation and windage reference points, ranging brackets, and floating center dot. It is not ideal for close-range or fast-acquisition shooting where a simple duplex or red-dot sight would be faster.

Q: Can I mount the Vortex Razor HD Gen II-E on any rifle?

A: You can mount this riflescope on any rifle with a compatible scope base and rings, provided the tube diameter and eye relief suit your rifle’s configuration. Precision rifles with Picatinny or Weaver-style scope bases are the most common platform. Call 817-393-4000 to confirm tube diameter, ring height requirements, and mounting compatibility for your specific rifle before ordering.

Q: Does Western Sport offer gunsmithing services if I need the scope mounted?

A: Yes, Western Sport has gunsmithing services on site in Roanoke, and owner Lance Rankin can handle scope mounting, bore-sighting, and fitting. If you need rings lapped, bases installed, or the optic set up for your rifle, call 817-393-4000 to schedule the work or discuss what your build requires.

Q: How does the Razor HD Gen II-E compare to other Vortex riflescopes?

A: The Razor HD line represents Vortex’s premium tier of riflescopes, with features and glass quality aimed at competitive and professional shooters. The Gen II-E designation distinguishes this model within the Razor HD family, but exact optical specifications, turret design, and included features should be confirmed by calling 817-393-4000. Lower-tier Vortex lines like Diamondback and Viper cost less and may suit hunters or recreational shooters who do not need first-focal-plane reticles or competition-grade turrets.

Additional information