Original price was: $2,452.00.$2,282.00Current price is: $2,282.00.
- Shipping: $25.00 to your FFL dealer. Most firearms ship the same or next business day.
- Returns: Final sale once it ships. Inspect it at your FFL before you accept the transfer.
- Failed background check: Your FFL returns it to us within 30 days. Refund is the price minus a 15% restocking fee and shipping both ways.
- Cancel: Full refund only if it’s been backordered 14+ days and hasn’t shipped.
- Damaged or wrong item: Tell us within 3 days and we’ll email you a free return label.
- MPN
- 02-128-00166
- UPC
- 818773020725
- Caliber
- .300 Blackout
- Action
- AR Platform, Semi-Auto
Daniel Defense DDM4 V7P, 300 Blackout, 10.3″ Cold Hammer Forged Barrel, MFR 9″ M-LOK Rail—a compact, suppressor-ready AR-pistol built for close-range performance and subsonic reliability.
SHARE THIS
Product Description
The Daniel Defense DDM4 V7P in .300 Blackout is a compact, maneuverable AR-pistol built for shooters who demand reliability and versatility. This configuration pairs a 10.3-inch cold hammer forged barrel with the proven DDM4 platform. Additionally, the SBA3 stabilizing brace delivers cheek weld and adjustability without NFA requirements.
Every Daniel Defense firearm is hand assembled, quality assurance tested, and test fired before shipping. Furthermore, the 9-inch M-LOK handguard keeps your platform modular and ready for optics, lights, and accessories. The .300 Blackout cartridge excels as a suppressor host—subsonic loads cycle reliably while delivering proven close- to medium-range terminal performance.
This pistol-configuration AR is ideal for home defense, tactical training, and shooters seeking a compact, legal platform without SBR paperwork. The 30-round magazine and chrome-lined barrel ensure reliability through extended shooting sessions. Finally, brown furniture gives this build a professional, finished aesthetic.
Purpose-Built for Suppressed .300 Blackout Performance
The 10.3-inch barrel maximizes the subsonic advantages of .300 Blackout while maintaining excellent velocity for close-range terminal ballistics. Therefore, this configuration is purpose-built for shooters who run suppressors or prioritize short-range accuracy and power.
Materials & Construction
- Lower Receiver: Daniel Defense Lower Receiver, Forged 7075-T6 Aluminum, Type III Hard Coat Anodized, Mil-Spec
- Upper Receiver: Daniel Defense Upper Receiver, Forged 7075-T6 Aluminum, Type III Hard Coat Anodized, Forward Assist and Dust Cover
- Barrel: 10.3″ Cold Hammer Forged, 1:8″ Twist, Chrome Lined, S2W Profile, Mil-Spec Heavy Phosphate Coated
- Gas System: Pistol-Length Direct Impingement Gas System with Low-Profile Gas Block
- Muzzle Device: Daniel Defense Flash Suppressor, 5/8×24 Threaded
- Handguard: Daniel Defense MFR 9.0 M-LOK, Free-Float, M-LOK Attachment Points, Continuous Top 1913 Picatinny Rail, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
- Bolt Carrier Group: Daniel Defense Bolt Carrier Group, Mil-Spec MP Tested, HPT, with Properly Staked Gas Key
- Charging Handle: Daniel Defense Mil-Spec Charging Handle
- Trigger: Daniel Defense Mil-Spec Single-Stage Trigger
- Buffer: Pistol Buffer with Action Spring
- Receiver Extension: Daniel Defense Pistol Receiver Extension
- Stabilizing Brace: SB Tactical SBA3 Pistol Stabilizing Brace, 5-Position Adjustable
- Pistol Grip: Daniel Defense Pistol Grip, Glass-Filled Polymer with Soft-Touch Overmolding
Specifications
| SKU / MPN | DD02-128-00166 |
| Product Type | Semi-Automatic Pistol with Stabilizing Brace (Non-NFA) |
| Item Condition | New |
| Caliber | .300 Blackout |
| Finish | Brown |
| Barrel | 10.3″ Cold Hammer Forged, 1:8″ Twist, Chrome Lined, S2W Profile, Mil-Spec Heavy Phosphate Coated |
| Gas System | Pistol-Length Direct Impingement Gas System with Low-Profile Gas Block |
| Trigger | Daniel Defense Mil-Spec Single-Stage Trigger |
| Mounting System | M-LOK |
| Handguard / Rail System | Daniel Defense MFR 9.0 M-LOK, Free-Float, M-LOK Attachment Points, Continuous Top 1913 Picatinny Rail, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized |
| Bolt Carrier Group | Daniel Defense Bolt Carrier Group, Mil-Spec MP Tested, HPT, with Properly Staked Gas Key |
| Charging Handle | Daniel Defense Mil-Spec Charging Handle |
| Muzzle Device | Daniel Defense Flash Suppressor, 5/8×24 Threaded |
| Stabilizing Brace | SB Tactical SBA3 Pistol Stabilizing Brace, 5-Position Adjustable |
| Magazine | Magpul PMAG 30 GEN M3 (30-Round, .300 Blackout Compatible) |
This firearm ships from the factory with a pistol stabilizing brace attached to a pistol-length receiver extension, configured as a pistol — not a rifle. A 2024 federal court ruling vacated ATF’s 2023 rule that reclassified braced pistols as Short-Barreled Rifles (SBRs), and the government dropped its appeal of that ruling in 2025. As a result, a stabilizing brace alone no longer causes a pistol to be treated as an SBR under the National Firearms Act (NFA). As configured and shipped, this pistol requires no NFA registration or tax stamp — only the standard ATF Form 4473 background check at transfer. Adding a shoulder stock would make it a short-barreled rifle (SBR). Since October 9, 2026, ATF no longer requires an approved Form 1 for that, but your state’s law still applies, and an SBR needs an approved ATF Form 5320.20 to cross state lines. Western Sport cannot advise on individual compliance — buyers are responsible for following all applicable federal, state, and local law.
Comparing configurations? See every Daniel Defense 300 Blackout we stock — V7P, PDW, ISR and the 300S upper — side by side. Also available in black anodized.
Ordering from Western Sport
Order online and we ship it to the licensed FFL dealer you choose near you — see how buying a gun online works. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.
Frequently Asked Questions
Q: What ammunition performs best with this .300 Blackout configuration?
A: Subsonic rounds (below 1,125 feet per second) cycle reliably through the 10.3-inch barrel and pair perfectly with suppressors. Supersonic loads also perform well for short-range hunting and defense. We recommend quality factory ammunition from Federal, Hornady, or Black Hills.
Q: What optics and accessories are compatible with the M-LOK rail?
A: The 9-inch M-LOK handguard accepts any M-LOK-compatible accessories—red dots, lights, slings, and vertical grips mount securely. Additionally, the Picatinny top rail accommodates magnified optics and quality red dots from Aimpoint, Trijicon, or Holosun. Our staff can recommend proven combinations in stock.
Q: Is this a good choice for my first AR-pistol?
A: Yes. The DDM4 V7P combines Daniel Defense reliability, proven ergonomics, and the versatility of .300 Blackout. Moreover, the SBA3 brace and compact 10.3-inch barrel make this platform easy to handle and shoot accurately. It’s an excellent entry point into quality AR-pistol ownership.
Q: What comes in the box, and what’s the warranty?
A: The rifle ships with one 30-round magazine and a hard case. Daniel Defense provides a limited lifetime warranty covering defects in materials and workmanship. Additionally, Western Sport’s staff can walk you through break-in, maintenance, and any early questions.
Q: What is the M-LOK handguard on this pistol?
A: Daniel Defense’s free-float M-LOK handguard lets you attach lights, lasers, and grips directly to the rail using the M-LOK slot system — no separate rail sections required. Additionally, the handguard floats independently of the barrel, so attachments don’t shift your zero. A continuous top rail provides a stable mounting surface for optics.
Q: Will I need to file ATF paperwork or pay a tax stamp for this firearm’s brace?
A: No. As configured and shipped, this is a pistol with a stabilizing brace — not a Short-Barreled Rifle (SBR). ATF’s 2023 rule treating braced pistols as SBRs was vacated by federal courts in 2024, and the government dropped its appeal in 2025. Only the standard ATF Form 4473 background check applies at transfer, the same as for any other pistol. Installing a shoulder stock would change that — it would create an SBR and require an approved ATF Form 1 first.
Shop more Daniel Defense pistols and 300 Blackout and other ammunition at Western Sport.
Additional information
| Weight | 11.938 lbs |
|---|---|
| Action Type | |
| Caliber |

Reviews
No reviews on this item yet. Own one? Tell other shooters how it runs.