TY-SSIG-FBS-FMBT-00

Product Description

The Troy Industries TY-SSIG-FBS-FMBT-00 is a set of folding battle sights designed to provide backup aiming capability on modern sporting rifles and carbines. These flip-up iron sights deploy when needed and fold flat when running optics, making them a practical addition to any platform equipped with a Picatinny rail.

Folding battle sights serve a simple purpose: they give you a mechanical aiming solution if your primary optic fails, loses zero, or runs out of battery. They stay out of your sight picture when folded, and spring up with a quick press when called upon.

This configuration suits shooters who want reliable backup sighting without adding bulk or interfering with magnified optics, red dots, or holographic sights.

Key Facts

• Brand: Troy Industries
• Model Number: TY-SSIG-FBS-FMBT-00
• Product Type: Folding battle sights
• Category: Iron & Night Sights

Why Folding Battle Sights Matter

Fixed iron sights occupy rail space and can obstruct your view through low-mounted optics. Folding sights solve that problem by staying flat against the rail until you need them. A quick push of the release brings them upright and locks them in place.

Most shooters mount folding battle sights at a 45-degree offset or in the traditional 12 o’clock position as co-witnessed backups. Either way, the goal is the same: maintain a secondary aiming method that does not rely on batteries, electronics, or glass.

If you run a magnified scope, a folding front and rear set lets you transition to close-range shooting without removing the optic. If you run a red dot, they provide insurance against impact damage or dead batteries in the field.

Installation and Compatibility

Folding battle sights mount to any MIL-STD-1913 Picatinny rail. Installation requires only a flat-head screwdriver or Allen wrench, depending on the specific mounting hardware used. No gunsmithing is required for most applications.

Check rail space before ordering. Front sights typically mount on the gas block rail or the forward section of a flat-top upper receiver. Rear sights mount on the receiver rail, behind your optic or on the same plane if you are running an offset configuration.

If you are unsure about rail compatibility or mounting position for your specific upper receiver, call us at 817-393-4000. We can walk you through the fit before you order.

Choosing Between Fixed and Folding Iron Sights

Fixed iron sights are simpler, lighter, and often less expensive. Folding sights add mechanical complexity but solve the space and sight-picture problems that come with running optics on the same rail.

If you shoot irons-only or run a carry-handle upper, fixed sights make sense. If you run any kind of magnified or unmagnified optic and want a backup that does not interfere, folding battle sights are the standard solution.

Durability between the two is comparable when both are made by reputable manufacturers. The folding mechanism adds a hinge and a spring-loaded detent, but those components are designed to handle repeated deployment and the shock of recoil.

Buying from Western Sport in Roanoke, TX

Western Sport is a licensed FFL/SOT dealer serving North Texas and the DFW area since 2007. We carry optics, sights, and accessories for modern sporting rifles, with gunsmithing and installation services available on site. Call 817-393-4000 to order or confirm specifications.

Frequently Asked Questions

Q: What rail type do Troy Industries folding battle sights fit?

A: The TY-SSIG-FBS-FMBT-00 mounts to MIL-STD-1913 Picatinny rail. This is the standard rail system on AR-15 and AR-10 flat-top upper receivers, as well as most aftermarket handguards and gas block rails. Confirm that your rail follows the Picatinny spec before ordering, as some proprietary or KeyMod/M-LOK slots require separate adapters.

Q: Can I use folding battle sights with a red dot or magnified optic?

A: Yes, folding battle sights are designed specifically to work alongside optics. When folded, they stay below your sight line and do not obstruct your view through a red dot, holographic sight, or low-power variable optic. Deploy them by pressing the release, and they lock upright for use as backup irons if your optic fails or loses power.

Q: How do I know if these sights will clear my optic mount?

A: Clearance depends on the height and footprint of your optic mount and the position where you plan to install the sights. Most folding battle sights are designed to tuck under standard-height mounts when folded. For specific clearance questions related to your setup, call us at 817-393-4000 and describe your upper receiver and optic configuration.

Q: Do Troy folding sights require any gunsmithing to install?

A: No, installation is straightforward and requires only basic hand tools. Most folding battle sights use a clamping mechanism secured with screws or a throw lever. Align the sight on the rail, tighten the mounting hardware, and confirm that the sight locks firmly in both the folded and deployed positions. If you prefer professional installation, our gunsmith can handle it on site.

Q: What is the difference between folding battle sights and flip-up sights?

A: The terms are often used interchangeably. Both describe iron sights that deploy upright when needed and fold down when not in use. “Folding battle sights” is a branding term used by some manufacturers, while “flip-up sights” is the more general category name. Functionally, they accomplish the same goal: providing low-profile backup aiming capability on rifles equipped with optics.

Q: Can I order the Troy TY-SSIG-FBS-FMBT-00 over the phone?

A: Yes, call Western Sport at 817-393-4000 to place an order. We are a licensed FFL/SOT dealer located in Roanoke, Texas, serving the North Texas and DFW area. Our staff can answer questions about fit, compatibility, and shipping, and can help you add any related accessories or tools you may need for installation.