Original price was: $1,571.00.$1,462.00Current price is: $1,462.00.
1 in stock
4.9278 Google reviews- Shipping: $9.99. Most in-stock orders ship the same or next business day.
- Returns: Final sale.
- Damaged or wrong item: Tell us within 3 days and we’ll email you a free return label.
Daniel Defense DDM4 300S URG is a complete AR-15 upper in .300 AAC Blackout with a 10.3" cold hammer forged barrel. It is for builders who want a compact, short-barreled .300 BLK upper to put on an AR-15 pattern lower.
- Chambered in .300 AAC Blackout
- 10.3" cold hammer forged, chrome lined barrel
- 1:8 twist with pistol-length direct impingement gas
- DDM4 Rail 9.0 free-float Picatinny quad rail
- Mil-Spec MP tested M16 profile bolt carrier group
- Weighs 3.65 lbs; fits AR-15 pattern lowers
SKU: DD-23-088-19020-047 · Mfr part #: 23-088-19020-047 · UPC: 815604015134
SHARE THIS
Product Description
The Daniel Defense DDM4 300S URG is a complete upper receiver group in .300 AAC Blackout with a 10.3″ cold hammer forged barrel. The barrel is chrome moly vanadium steel in the S2W profile, chrome lined and finished in mil-spec heavy phosphate. The whole upper weighs 3.65 lbs.
What sets it apart
This upper is built around the .300 Blackout cartridge. The 1:8 twist is tuned for both supersonic and subsonic loads. A pistol-length direct impingement gas system runs through a pinned, low-profile gas block machined from 4140 hardened steel. Up front is the Daniel Defense flash suppressor in 17-4 PH stainless steel with a salt bath nitride finish. The DDM4 Rail 9.0 is a free-float Picatinny quad rail with four rails at 12, 3, 6 and 9 o’clock, machined from 6061-T6 aluminum and Type III hard coat anodized. The receiver is 7075-T6 aluminum with M4 feed ramps, and the bolt carrier group is an M16 profile, MP tested and chrome lined, with a properly staked gas key. The Grip-N-Rip charging handle completes the group.
It suits builders who want a short, handy .300 BLK setup on an AR-15 pattern lower. The cartridge works best with a pistol-length gas system and a short barrel, and it is most effective when paired with a suppressor. Short barrels can bring federal rules into play once the upper goes on a rifle lower, so check your build plan before you order.
Four Picatinny rails leave room for optics, weapon lights, grips and other rail-mounted gear. Pair it with the AR-15 lower of your choice and a suppressor if you plan to run subsonic loads.
Daniel Defense DDM4 300S URG — 10.3 inch 300 Blackout Complete Upper Specifications
| Caliber | .300 AAC Blackout |
|---|---|
| Barrel Length | 10.3" |
| Barrel | S2W Profile, Chrome Moly Vanadium Steel, Cold Hammer Forged, Chrome Lined, Mil-Spec Heavy Phosphate Coated |
| Twist Rate | 1:8" |
| Gas System | Pinned Low-Profile Gas Block, CNC Machined of 4140 Hardened Steel, Mil-Spec Heavy Phosphate Coating, Pistol-Length, Direct Impingement |
| Muzzle Device | Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished |
| Muzzle Thread | 5/8×24 TPI |
| Handguard | Daniel Defense DDM4 Rail 9.0, Free-Float, Picatinny Quad Rail (1913 Spec, four rails at 12/3/6/9 o'clock), CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized |
| Bolt Carrier Group | M16 Profile Bolt Carrier Group, Mil-Spec MP Tested, Chrome Lined, with Properly Staked Gas Key |
| Charging Handle | Daniel Defense GRIP-N-RIP Charging Handle — Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized |
| Upper Receiver | Mil-Spec with Indexing Marks and M4 Feed Ramps, CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized |
| Platform It Fits | AR-15 pattern lowers |
| Finish / Color | Black |
| Weight | 3.65 lbs |
| UPC | 815604015134 |
| Mfr Part # | 23-088-19020-047 |
| Shipping Weight | 5.2 lbs (boxed) |
NFA Note: Barrel Under 16 Inches
This upper ships with a barrel measuring under 16 inches. Installing it on a rifle-configured AR-15 lower receiver makes a short-barreled rifle (SBR). Since October 9, 2026, ATF no longer requires an approved Form 1 or tax stamp to build one, but your state's law still applies, and an SBR needs an approved ATF Form 5320.20 to cross state lines. Western Sport cannot advise on individual compliance; buyers are responsible for following all applicable federal and state law.
What’s in the Box
Complete upper receiver group: Barrel and upper receiver, handguard, bolt carrier group, charging handle, flash suppressor. Lower receiver not included.
Fits and Pairs With
- Winchester Ammunition POWER-POINT, 300 Blackout, 150 Grain, 20 Round Box
- Federal American Eagle, Suppressor Ammunition, 300AAC Blackout, 220 Grain, 20 Round Box
- Lehigh Defense Maximum Expansion, 300 Blackout, 194 Grain, Boat Tail Hollow Point, 20 Round Box
- Frontier Cartridge Frontier, 300 Blackout, 208 Grain, Subsonic, 20 Round Box
Ordering from Western Sport
Order online and it ships straight to your door. Western Sport has been a licensed FFL/SOT dealer since 2007, and everything we sell carries the full manufacturer warranty. Questions before you order? Send us a message.
Frequently Asked Questions
Q: What lower receivers are compatible with the Daniel Defense DDM4 300S upper?
A: AR-15 pattern lowers. This upper is built to fit that platform.
Q: What ammunition does the Daniel Defense 300S URG shoot best?
A: It is built for .300 AAC Blackout. The 1:8 twist is tuned for both supersonic and subsonic loads.
Q: What barrel and gas system does the DDM4 300S upper use?
A: The barrel is 10.3" long, cold hammer forged and chrome lined, with a 1:8 twist. The gas system is pistol-length direct impingement with a pinned low-profile gas block.
Q: What handguard and muzzle device come on the DDM4 300S?
A: The handguard is the DDM4 Rail 9.0, a free-float Picatinny quad rail. The muzzle device is the Daniel Defense flash suppressor in 17-4 PH stainless steel.
Warranty and Manufacturer
Covered by the Daniel Defense factory warranty. Full product details and warranty terms are on the Daniel Defense website.
Additional information
| Caliber |
|---|
Before you order: short barrels after October 9, 2026
This is a short upper. Since October 9, 2026, ATF no longer requires an approved Form 1 or Form 4, a tax stamp or registration for a short-barreled rifle, and Texas removed short-barreled rifles from its prohibited-weapons list in 2025. In Texas, this upper can go on a rifle lower without federal paperwork. It also still fits a pistol lower.
Two things still apply. If you live outside Texas, your own state’s law decides — some states ban short-barreled rifles, and some only allow ones registered with ATF. And taking an SBR across state lines still needs an approved ATF Form 5320.20.
A 14.5″ upper with the muzzle device pinned and welded to 16 inches is a standard rifle either way. Western Sport has held an SOT/Class III license since 2007 — send us a message and we will tell you what your build needs.
You may also like…
-
Add to cart
Lehigh Defense Maximum Expansion, 300 Blackout, 194 Grain, Boat Tail Hollow Point, 20 Round Box
$81.95 -
Read more
Federal American Eagle, Suppressor Ammunition, 300AAC Blackout, 220 Grain, 20 Round Box
$41.99 -
Add to cart
Winchester Ammunition POWER-POINT, 300 Blackout, 150 Grain, 20 Round Box
$36.95 -
Read more
Frontier Cartridge Frontier, 300 Blackout, 208 Grain, Subsonic, 20 Round Box
$37.95
Reviews
No reviews on this item yet. Own one? Tell other shooters how it runs.