A super safety and an FRT do the same job in different places. A forced reset trigger (FRT) replaces your AR-15’s whole trigger group and forces the trigger to reset after each shot. A super safety, properly called a forced reset selector, replaces only the safety selector, keeps your existing trigger, and adds a third position that forces the reset. Both fire one round per pull of the trigger. The right choice comes down to your trigger, your budget and how much of the rifle you want to change.
Super safety vs FRT at a glance
- FRT: a drop-in trigger group, such as the Rare Breed FRT-15L3, that replaces your trigger, hammer and disconnector and includes its own selector.
- Super safety: a forced reset selector, such as the Atrius Forced Reset Selector, that replaces only the safety and works with a compatible mil-spec trigger you already own.
- Rounds per pull: one, for both. Neither is a binary trigger and neither is a machine gun.
- What both need: a full-auto (M16) or full-profile bolt carrier and, in most rifles, an H2 or H3 buffer.
- Cost: a forced reset selector usually costs less than a complete drop-in FRT.
- Shipping: both are parts, not firearms. No FFL. Both carry the same state shipping restrictions.
Side-by-side comparison
| Forced reset trigger (FRT) | Super safety / forced reset selector | |
|---|---|---|
| What you replace | The whole fire control group | Only the safety selector |
| Your current trigger | Removed | Kept, if it is compatible |
| Positions | Safe / Semi / FRT (FRT-15L3) | Safe / Semi / Super-Semi (Atrius) |
| Trigger compatibility | Not a concern; the FRT is the trigger | Needs a mil-spec style trigger with a squared-off trigger bar; triggers with a U-notch or relief cut will not work (Atrius) |
| Bolt carrier | Full-auto compatible BCG required (Rare Breed) | Full-profile BCG required (Atrius) |
| Buffer | H2 or H3, or an A5 system, recommended | H2 or H3 minimum |
| Lower receiver | Mil-spec AR-15; may not fit some Colt models or lowers with a sear block | Low-shelf or full-profile trigger pocket; not high-shelf lowers |
| Install | Remove your trigger group, drop in the housing, install the included selector and anti-walk pins | Remove the pistol grip and old selector, install the new selector and cam lever; the buffer tube stays on |
| Platforms | AR-15 in .223/5.56 and .300 BLK; not AR-10 or AR-9 | AR-15 in .223/5.56 and .300 BLK; not AR-10; AR-9 may need gunsmithing |
| Feel | Single-stage in both modes | Uses the feel of the trigger you already have |
Requirements above come from Rare Breed Triggers and Atrius Development Group for the products we carry. Other brands differ, so always check the maker’s list for your exact model.
How each one works
Forced reset trigger
When the bolt carrier travels rearward and rolls the hammer back, the FRT uses that movement to push the trigger forward against your finger, resetting it. A locking feature keeps the hammer from following the carrier until the bolt returns to battery. Keep pressure on the trigger and it is ready for the next pull almost at once. Full details are in our forced reset trigger guide.
Super safety (forced reset selector)
A forced reset selector has a cam on the selector shaft. In the third position, the hammer’s rearward travel works through that cam and the selector’s lever to push your existing trigger forward to reset. In Safe and Semi it behaves like a normal selector. That is why it can turn a compatible mil-spec trigger into a forced reset setup without replacing the trigger group.
Which should you buy?
- Choose an FRT if you want a complete, self-contained system that does not depend on your existing trigger, or if your current trigger has a relief cut or U-notch that rules out a selector. The Rare Breed FRT-15L3 is the established choice.
- Choose a super safety if you like the trigger you already have, want the lower-cost option, or want an ambidextrous lever. Start with the Atrius Forced Reset Selector (single-sided), the Atrius Mil-Spec Ambi, or the Ambi 3-Position Forced Reset Selector, an unbranded ambidextrous option.
- Running a Geissele trigger? The Atrius G-Lever is made for Geissele SSA, SSA-E and G2S triggers. Atrius lists the Geissele X Series as not compatible.
- Shooting an MP5 clone? Neither of the AR-15 parts applies. MP5-pattern guns use a super safety built into the trigger housing, such as the Lee Sporting LS5 MP5 super safety lower. See our MP5 super safety guide.
Whichever you pick, budget for an M16-profile bolt carrier and an H2 or H3 buffer if your rifle does not already have them. We stock M16 carriers from Rankin Industries, Daniel Defense, Faxon and Phase 5.
Is a super safety legal?
A forced reset selector fires one round per function of the trigger, like an FRT, and there is no federal statute or ATF rule written specifically for it. State laws that restrict forced reset or rapid-fire devices may cover super safeties too, so we apply the same shipping restrictions to both: no shipments to CA, CO, CT, DE, DC, FL, HI, IL, IA, MD, MA, MN, NV, NJ, NY, OR, RI, VA or WA, U.S. territories or outside the United States. Read Are FRT triggers legal? for the federal background and Texas. This is not legal advice.
Super safety vs FRT FAQ
Is a super safety the same as an FRT?
Not exactly. Both force the trigger to reset after each shot and fire one round per pull, but an FRT replaces the whole trigger group while a super safety (forced reset selector) replaces only the safety selector and works with your existing compatible trigger.
Which is faster, a super safety or an FRT?
Both are limited mainly by how fast the rifle cycles and how fast you can pull. Shooters report similar practical speed. Reliability depends more on the bolt carrier, buffer and gas system than on which device you choose.
Do I need a special trigger for a super safety?
You need a compatible one. Atrius requires a mil-spec style trigger with a squared-off trigger bar and lists triggers with a U-notch or relief cut as incompatible. Geissele SSA, SSA-E and G2S owners should use the Atrius G-Lever model.
Does a super safety need an M16 bolt carrier?
Yes. Atrius requires a full-profile bolt carrier group and an H2 or H3 buffer for its forced reset selectors, the same kind of carrier Rare Breed requires for the FRT-15L3.
Which 3 position super safety is the best?
For most AR-15 owners with a mil-spec trigger, a forced reset selector is the place to start: the Ambi 3-Position Forced Reset Selector if you want levers on both sides, or the Atrius Forced Reset Selector in single-sided or ambidextrous form. Choose the G-Lever version for Geissele SSA, SSA-E or G2S triggers. If your trigger is not compatible with any selector, a drop-in FRT such as the Rare Breed FRT-15L3 avoids the problem.
Can I install a super safety myself?
Most owners can. You remove the pistol grip, selector spring and detent, take out the old selector, and install the new selector and its cam lever; Atrius notes the buffer tube does not need to come off. Do a full function check before live fire. Our Atrius selector guide covers the steps.
Shop both styles in our forced reset trigger category or the super safety category. Everything ships to your door, no FFL, to states we can ship to. Not sure what is in your rifle? Send us a message with your trigger and bolt carrier and we will help you match it.
Last reviewed October 3, 2026. Compatibility data from Rare Breed Triggers and Atrius Development Group. Not legal advice.